CD74HC244M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A CD74HC244M is an 8-bit non-inverting buffer/line driver with 3-state outputs and is designed for 2.7V-3.6V VCC operation. The device has a 80 uA guaranteed minimum −3 dB bandwidth of 24 MHz and can drive up to 10 LS-TTL loads. This buffer is designed to be used with the 3V-5V TTL and CMOS logic families. It is capable of driving 15 LS-TTL loads. This device is especially useful for bus driving and high fan-out applications.

The CD74HC244M is used often in systems were there is a need to form data and address buses. These buses require drivers such driving signals to and from the various chips. Accordingly, the CD74HC244M helps to reduce the noise and reflections associated with the data bus. The device can also be used with microcontroller applications to share port pins.

The device is used in a wide variety of systems, including a wide range of logic families (3V-5V TTL, CMOS). These ICs are also used in digital systems and data converters, where there is a need to drive signals from chip to chip, from chip to other inputs, and from chip to peripherals.

The device is particularly useful when interfacing to digital systems that require a single ended or differential logic output. The device also features an internal Schmitt trigger action, which helps reduce noise on the output waveform and improve noise immunity. This feature helps reduce the number of logic elements and reduces system power consumption.

The primary function of the CD74HC244M is in its role as a buffer. Buffers act as an interface between two pieces of equipment, allowing one device to send information to another. In this capacity, the CD74HC244M serves as an amplifier, conditioning and adjusting input signals, and helping to minimize noise on the output. The device also improves the system’s ability to control bus signals.

As a line driver, the CD74HC244M drives signals from one part of the system to another. The line driver ensures that the signals remain in both the logic low and logic high states. In this capacity, the device helps to transmit signals with minimal distortion and noise. The buffering nature of the CD74HC244M helps to reduce reflections, thereby providing the system with more reliable performance.

The CD74HC244M also serves as a receiver. This means that the device can accept electrical signals and convert them into logic levels. The device can be used in systems to reduce power consumption and increase signal integrity.

Finally, the CD74HC244M is also capable of acting as a transceiver. This means that the device is able to both transmit and receive information. The transceiver is a key component in communication systems, and the CD74HC244M works to ensure the integrity and stability of the data stream between two pieces of equipment.

In summary, the CD74HC244M is an 8-bit non-inverting buffer/line driver with 3-state outputs and is designed for 2.7V-3.6V VCC operation. The device is an important component in a wide variety of systems, and is used as a buffer, line driver, receiver, and transceiver. The device helps to reduce noise and reflections, improve signal integrity and stability, and reduce power consumption, making it an essential component in any digital system.

The specific data is subject to PDF, and the above content is for reference