CD74HC245MG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CD74HC245MG4 is a component commonly used in electronic circuits. It is classified as a logic buffer, driver, receiver, and transceiver. The device is a high-speed, low-power octal bus transceiver and is capable of providing three-state outputs. It is an integrated circuit and provides fast output drive capability, adjustable bus owner and capability to monitor bus state.

The purpose of the component is to provide asynchronous two-way communications and the ability to interface high-speed signals between two buses. Its primary application field is for data transfer between multiple buses, for example, for the purpose of multiplexing and demultiplexing different signals. Its fields of applications also include communications, printing and data processing systems, in addition to networking applications.

The primary features of the device include a wide operating voltage range, high-speed data transfer, outputs capable of both sourcing and sinking up to 4 mA of current at 4.5 V, and an input voltage range of 0 to 5.5 V. Other features include a propagation delay time of 16 ns, output changessupporting transitions between 0 and 4.5 V, static power consumption of less than 8 μW and dynamic power consumption of less than 100 μW. The device also has an excellent noise immunitylevel and supports very low signal distortion.

This component is typically used in conjunction with multiple other components in order to perform its intended function. To understand how the component works, one must first understand its architecture. The component has two buses, referred to as the A and B buses. Both buses are connected to a common bus line via a pair of data outputs and controlled by an enable (EN) signal. The A bus is typically used as the input, while the B bus is used as the output. The state of the enable signal dictates the direction of the data transfer. When EN is high, data is transferred from the A bus to the B bus; and when EN is low, data is transferred from the B bus to the A bus.

In addition to data transfer, the CD74HC245MG4 also provides live monitoring of data signals on the buses by pin 88 and 77. The two pins are connected to the A and B buses, respectively. This feature provides an additional level of security when handling sensitive data. The pins can be used to observe the state of the data lines without interference from the surrounding circuitry.

The device also has an adjustable bus owner capability. The bus owner pin is connected to the EN signal, and it can be used to temporarily transfer control of the A and B buses from the CD74HC245MG4 to an external device. This feature can be used to ensure that only authorized data are sent and received on the buses.

The device has several other features such as a built-in logic level translator circuit that is used to convert input and output voltages between 0 and 5.5 V. It also has an open collector output, which allows the CD74HC245MG4 to be connected to any external device. The open collector output is also useful when interfacing with other multiplexer/demultiplexer bus systems.

Finally, the CD74HC245MG4 has an integrated watchdog timer circuit, which can be used to reset the device in case of a system malfunction. This feature is a useful addition, as it can prevent data errors from propagating throughout the system.

In conclusion, the CD74HC245MG4 is an extremely versatile device and can be used in a variety of applications. Its main function is to provide asynchronous two-way communications and the ability to interface high-speed signals between two buses. Its additional features make it well-suited for use in communications, printing and data processing systems, as well as for digital networking applications.

The specific data is subject to PDF, and the above content is for reference