CD74HCT173ME4

Max Propagation Delay @ V, Max CL:	40ns @ 4.5V, 50pF
Base Part Number:	74HCT173
Package / Case:	16-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-55°C ~ 125°C (TA)
Input Capacitance:	10pF
Current - Quiescent (Iq):	8µA
Voltage - Supply:	4.5 V ~ 5.5 V
Current - Output High, Low:	6mA, 6mA
Trigger Type:	Positive Edge
Series:	74HCT
Clock Frequency:	60MHz
Number of Bits per Element:	4
Number of Elements:	1
Output Type:	Tri-State, Non-Inverted
Type:	D-Type
Function:	Master Reset
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CD74HCT173ME4 is a type of Transistor–transistor logic (TTL) integrated circuit that is commonly used in digital logic and data application fields.It is a four-bit S-R (set-reset) flip-flop that is used to store binary information (bits of data) in multi-bit application fields. The chip has two inputs, CLOCK and PRESET, with two outputs, Q and Q\'.The CD74HCT173ME4 can be found in digital logic circuits such as counters, shift registers, and memory devices. It is also used in data communications, digital signal processing (DSP), digital control systems, and embedded systems. The chip is made up of four NAND gates, each of which acts as the main element for the creation of the logic circuit. The clock input is used to trigger the change of state, while the preset input is used to switch between two different output states.The CD74HCT173ME4 is a latch-type flip-flop that is used to store information when the clock signal transitions from high to low. When the clock signal is high, the output of the chip is not affected. However, when the clock signal transitions from high to low, the output of the CD74HCT173ME4 will transition from the current state to the opposite state. This occurs because a change in the state of the clock signal causes the input which controls the output of the chip to change. A latch-type flip flop is used rather than a clocked flip flop because the output of the chip is independent of the clock signal when the clock signal is not transitioning from high to low.The CD74HCT173ME4 latch-type flip flop is especially suited for low-power applications because it draws low power while in operation. In addition, the chip draws no power while in standby mode, which is why it is often used in data communications, embedded systems, and digital signal processing applications that have stringent power requirements.The CD74HCT173ME4 can be used to create logic circuits that can store multi-bit data. This is accomplished by connecting several CD74HCT173ME4 chips together in a daisy-chain configuration. This allows the output of one chip to be connected to the input of the next one, and so on. In this manner, a multi-bit Digital Storage Device can be created, with each chip storing a single bit of data.The CD74HCT173ME4 can also be used to create logic circuits that support clocked logic. This is done by connecting the output of the CD74HCT173ME4 to the clock input of another logic element, such as a multiplexer or a shift register. In this manner, the CD74HCT173ME4 can be used as a data storage device, while the other logic element is used to control the flow of the data. This can be helpful in applications such as signal synchronization, signal conversion, and frequency division.The CD74HCT173ME4 is an important integrated circuit that can be found in a variety of digital logic and data application fields. It is a latch-type flip-flop that is used to store multi-bit data, and it is especially well-suited for low-power applications due to its low power consumption. In addition, the chip can be used to create logic circuits that support clocked logic, and it is commonly used in data communications, digital signal processing (DSP), digital control systems, and embedded systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description