CD74HCT174MG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CD74HCT174MG4 is an integrated circuit that serves multiple purposes and has many features that make it ideal for use in logic applications. It belongs to the Logic - Flip Flops family, which is a family of components that are suitable for electronic applications. A Flip Flop works as a type of latch, or storage device, which holds the output until its input is changed. There are two types of Flip Flops, the D type and the JK type. The CD74HCT174MG4 is of the JK type. The CD74HCT174MG4 is an eight-bit wide data bus that provides a complete logic synthesis and signal routing infrastructure for logic programmable systems. It can be configured in multiple configurations, such as eight independent output latches, independent logic gates, or a programmable device with a built-in reset and clock. The device supports a wide range of pulse inputs and outputs, as well as multiple-bit serial data streams. It is also compatible with many different terminal and peripheral interfaces.

The CD74HCT174MG4 has a typical voltage supply range of 1.8 V to 5.5 V and can operate up to 150 MHz with up to 0.25 ns of delay. It has high speed logic function support with power and propagation delay minimized. The logic circuit inside the IC consists of an eight-bit data bus that is separated into two four-bit buses. Each four-bit bus is then further divided into two pairs of JK flip-flops, one on the rising edge and one on the falling edge. The outputs of the rising edge flip-flops are connected to the outputs of the falling edge flip-flops, forming a single data bus. The output state is determined by the input values of the J and K inputs of the flip-flops.

The CD74HCT174MG4 can be used in a variety of applications such as programmable logic controllers, distributed memory controllers, and data communications systems. It is also used in interface controller applications, where it is used to control and monitor the state of I/O devices connected to the system or in digital control systems. The device can be used to control the flow of data and regulate the timing of signals in embedded systems. It is also used to detect and analyze the state of data inputs in data communications systems. It provides an efficient way to connect and detect the state of logic signals in high speed processor systems.

The CD74HCT174MG4 is a powerful, versatile, and easily implemented Logic Flip Flop type IC. It provides an efficient data input and output solution for a variety of systems, allowing for faster and more reliable operation. Its support for pulse inputs and outputs and its low power requirements make it a cost effective choice for many types of applications. Its versatility, combined with its easily implemented design, makes it an ideal choice of integrated circuitry for a wide range of logic systems.

The specific data is subject to PDF, and the above content is for reference