CDRH10D68RT125NP-101PC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are components used in many circuit designs. The CDRH10D68RT125NP-101PC is one such component. This inductor is composed of two parts: a core and a coil. The core is typically made of ferrite or iron which restricts the movement of the magnetic field and confines it within the inductor. The coil is wrapped around the core and is composed of copper wire wound in several loops. Electric current is applied to the coil and induces a magnetic field. This magnetic field results in a gravitational force that induces a current in the coil.

The CDRH10D68RT125NP-101PC is an inductor with a very specific application. It is commonly used in radio frequency (RF) transmitters and receivers. It is used to tune the receiver to a specific frequency, as well as to filter the signal before transmitting it. The inductor\'s precise geometry and tight tolerances allow for precise frequency tuning.

This specific inductor is composed of a ferrite core and a coil of enamelled copper wire. Its inductance is 10µH (Microhenries) and its DC resistance is 125 milliohms. The tolerances are generally ± 5%, but the tolerances can be as low as 2%. The inductor\'s operating temperature range is between -55℃ and +105℃.

The working principle behind the CDRH10D68RT125NP-101PC is simple. When a current is applied to the coil, a magnetic field is created. This magnetic field induces an electric field in the coil which produces the desired effect. For example, in an RF receiver, the inductor acts as a filter to remove high frequency signals from being received. In an RF transmitter, the inductor is used to tune the frequency, allowing data to be sent at the desired frequency.

In conclusion, the CDRH10D68RT125NP-101PC is a versatile fixed inductor designed for use in RF transmitters and receivers. It is composed of a ferrite core and a coil of enamelled copper wire, with an inductance of 10µH and a DC resistance of 125 milliohms. Its working principle is simple: the current induced magnetic field creates an electric field in the coil, allowing it to be used for tuning and filtering applications.

The specific data is subject to PDF, and the above content is for reference