CDRH10D68RT125NP-150PC

DC Resistance (DCR):	30.6 mOhm Max
Height - Seated (Max):	0.276" (7.00mm)
Size / Dimension:	0.402" L x 0.402" W (10.20mm x 10.20mm)
Supplier Device Package:	--
Package / Case:	Nonstandard
Mounting Type:	Surface Mount
Inductance Frequency - Test:	100kHz
Operating Temperature:	-40°C ~ 125°C
Ratings:	--
Frequency - Self Resonant:	--
Q @ Freq:	--
Series:	CDRH10D68R/T125
Shielding:	Shielded
Current - Saturation:	3.6A
Current Rating:	3.6A
Tolerance:	±25%
Inductance:	15µH
Material - Core:	Ferrite
Type:	--
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The CDRH10D68RT125NP-150PC is a component that is used for fixed inductors. Fixed inductors are components that are constructed to create inductive reactance, a resistance that is dependent on the frequency of the supplied electricity being passed through them. Fixed inductors can be found in many applications, from power supplies to automotive systems, though this particular model is most commonly used in electronic filter applications. This article will focus on the CDRH10D68RT125NP-150PC application field and working principle.

Application Field

The most common application of the CDRH10D68RT125NP-150PC is electronic filters. Electronic filters work by using inductive reactance to pass through certain frequencies and stop or change others. In this way, these filters act like a gate, allowing only certain frequencies to pass through, while others are blocked or modified. They are used in a variety of devices and applications, ranging from analog and digital audio equipment, to automotive systems and instrumentation.

Working Principle

The CDRH10D68RT125NP-150PC is a fixed inductor, and like other inductors, it creates inductive reactance when an electric current is passed through it. Inductive reactance is the resistance that is encountered by an alternating current when it flows through an inductor. It causes the voltage in the device to alternately rise and fall as it’s passing through, resulting in oscillations. The frequency of these oscillations depend on the size of the inductor coil and the number of turns in the coil, as well as other factors.The CDRH10D68RT125NP-150PC specifically is designed to create a low-pass filter, which allows frequencies below a certain point to pass through while higher frequencies are blocked. This is due to the fact that inductors become increasingly more resistive to a current as the frequency of the current rises. This makes it possible to use the CDRH10D68RT125NP-150PC in electronic filter applications, as it can block or modify certain frequencies with ease.

Conclusion

The CDRH10D68RT125NP-150PC is a component that is used for fixed inductors, most commonly in applications like electronic filters. It works by using inductive reactance to pass through certain frequencies and stop or change others. It is designed to create a low-pass filter, which allows frequencies below a certain point to pass through while higher frequencies are blocked. The use of this component in filter applications is invaluable as it can be used to effectively remove unwanted frequencies or modify existing ones.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description