CDRH8D43HPNP-680NC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are electrical components designed to induce a certain amount of inductance into a circuit. This type of inductor is a passive device that is used to store energy in the form of a magnetic field. They are typically made from a coil of wire with a core made from metal or ferrite. Fixed inductors are used to reduce noise and control impedance in circuits. The CDRH8D43HPNP-680NC is a specific type of fixed inductor and is used in a wide range of applications.

The CDRH8D43HPNP-680NC is a radial leaded, surface mount inductor with a shielded can. It has an inductance of 8.0µH, a current rating of 2.2A and a tolerance of 20%. The inductor has a footprint size of 10.5mm by 9.5mm and consists of 10 turns on a ferrite core. It is designed for use in high frequency, limited space applications where a shielded can is necessary. The fixed inductor has a high saturation current rating of 8.0A and a low DC resistance of 0.022Ω.

The working principle of this fixed inductor is quite simple. When an alternating current is applied to its terminals, an alternating magnetic field is created by the coil, inducing a magnetic flux in the core. This magnetic flux stores energy in the form of a magnetic field, which resists change in the current flowing through the inductor. This is referred to as the inductance of the inductor, which is the measure of its ability to resist changes in current.

The CDRH8D43HPNP-680NC is widely used in a wide range of applications, including radio and communication equipment, industrial controls, power supplies, consumer electronics, automotive systems and robotics. It is also used in circuits for noise reduction and signal line impedance control. The inductor is often used in RF switching, broadband signaling, RF and audio coupling, EMI filtering and EMC protection.

The CDRH8D43HPNP-680NC is a fixed inductor that is designed for use in high frequency, limited space applications where a shielded can is necessary. It has an inductance of 8.0µH, a current rating of 2.2A and a tolerance of 20%. It is widely used in a variety of applications including radio and communication equipment, industrial controls, power supplies, consumer electronics, automotive systems and robotics. The working principle of this fixed inductor is quite simple, as it works by creating an alternating magnetic field when an alternating current is applied to its terminals.

The specific data is subject to PDF, and the above content is for reference