CE3290-60.000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electronic circuits used to generate periodic signals such as sine waves, square waves, triangle waves, and sawtooth waves. A CE3290-60.000 is one type of oscillator which combines both sine- and square-wave generations. It also provides excellent performance in a wide variety of applications including clock synchronization, sampling, pulse-width modulation, and as a valuable control source for synthesizers.

The CE3290-60.000 is a single stage monolithic Integrated Circuit which consists of a oscillator, voltage regulator, temperature sensor, and op-amp stages. It can generate sine waves up to 60 MHz without the need for an external oscillator. The sine wave can be adjusted via the on-board saturation control and digital to analog converters. It also has a square wave signal which is generated by the voltage regulator. The output of the CE3290-60.000 is selectable between sine and square wave signals.

The working principle of the CE3290-60.000 is based on the use of a voltage-controlled oscillator (VCO) and a feedback loop to generate periodic signals. The VCO is made up of two transistors, one capacitor, and one resistor. Voltage is applied to the base of one transistor while the emitter of the other transistor is connected to ground. A voltage divider is also used to reduce the voltage level of the signal. The output of the voltage divider is connected to the base of the second transistor. This creates a feedback loop which ensures that the output signal is a periodic one.

The CE3290-60.000 has excellent thermal stability and can run up to temperatures of 150 degrees Celsius. It can also be used with a wide range of polarities which makes it an ideal choice for highly demanding applications. The device also features very low noise levels which is suitable for accurate sampling of high frequency signals. It also has good linearity which makes it a suitable choice for digital-to-analog converters. Lastly, the CE3290-60.000 comes with a wide range of output frequencies which can be adjusted via its digital potentiometers.

The CE3290-60.000 is a versatile oscillator which can be used in a variety of applications. It can be used for synchronizing clock signals, modulating pulse widths, and as a control source for digital-to-analog converters. It also has excellent temperature stability which enables it to run up to very high operating temperatures. Furthermore, it has low noise levels and a wide range of polarities which makes it an ideal choice for highly demanding applications.

The specific data is subject to PDF, and the above content is for reference