CER0245F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Ceramic filters (CER0245F) are used in a variety of applications, ranging from telecommunications systems to medical imaging. Generally, they are comprised of two or more layers of ceramic material, which are sealed together. They are used in communications systems as an intermediate frequency (IF) filter, where they block signals outside of a given passband.

One of the key benefits of using ceramic filters in communications applications is their wide range of bandwidths and insertion losses. Insertion loss is the amount of signal that is lost when the filter is inserted in the signal path. Generally, ceramic filters have low insertion loss and high selectivity over a wide range of bandwidths. This makes them ideal for use in device applications, such as cellular phones and other wireless communication devices.

In medical imaging, ceramic filters are used for attenuating artifacts from unwanted signals, such as electrical interference. This ensures that images remain sharp and clear. Ceramic filters can also be used to isolate power supply lines from sensitive signal lines in order to reduce noise interference.

The working principle of ceramic filters is quite simple. They are designed to reject unwanted signals and pass the desired signals with as little distortion or noise as possible. A common type of ceramic filter is a piezoelectric ceramic filter, which is composed of two layers of piezoelectric material. The top layer is a dielectric material that acts as an insulating layer. The bottom layer is a piezoelectric material, which acts as an oscillator.

The piezoelectric material is electrically connected to the oscillator. When an input signal is applied to one side of the filter, the oscillator produces an oscillating voltage. This voltage is then applied to the other side of the filter. The oscillating voltage will cause the piezoelectric material to vibrate at the same frequency as the input signal.

To achieve the desired filtering action, the frequency range of the oscillating voltage must be within the desired passband. As the frequency of the input signal increases, the amplitude of the oscillating voltage will decrease. As the frequency of the input signal decreases, the amplitude of the oscillating voltage will increase. This process is known as frequency-selective filtering, and it is used to ensure that only the desired signals pass through the filter.

Ceramic filters are used in a wide variety of applications where frequency-selective filtering is essential. They are used in medical imaging, radar systems, communications systems, and various types of electronic devices. Ceramic filters are reliable, easy to use, and require little maintenance. They are cost-effective and provide excellent performance in most applications.

The specific data is subject to PDF, and the above content is for reference