CF14JB5R10

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are components commonly used in the electronics industry that provide electrical resistance across circuits. Among the various types of resistors available, CF14JB5R10 is a commonly used through-hole resistor.

CF14JB5R10 resistors are made from carbon film material, meaning that they consist of a thin layer of carbon that has been applied to ceramic top and bottom. The resistor is then dipped in molten metal to create a thin metal layer known as the termination. This layer provides the electrical connection points for the resistor.

CF14JB5R10 resistors are available in variable resistances, ranging from 10 ohms to 500 ohms, making them ideal for applications that require precise control over the impedance of a circuit. For example, they are used to control the output of motor drivers, as well as the power supply and load to electronic circuits.

The CF14JB5R10 can also be used as a current limiting resistor in applications where an overload may occur. This is done by setting the resistance of the resistor to be slightly lower than the needed resistance, so that when an overload does occur, the resistor will reduce the amount of current by limiting it to a safe level.

In addition, the CF14JB5R10 resistor is also used as a thermistor, meaning that its resistance will change when the temperature of the resistor increases or decreases. This makes it ideal for use in temperature sensing and control applications.

CF14JB5R10 resistors are also well suited for use in damp locations, as their sealed construction means that they are protected from the effects of moisture and dust. This makes them suitable for use in appliances or other metal parts and components that may be exposed to moisture or high levels of dust.

The CF14JB5R10 has a tolerance of +-2%, meaning that the actual resistance of the resistor will be within 2% of the marked resistance. This makes it ideal for applications requiring close tolerances, as precise adjustments can be made without significantly altering the impedance of the circuit.

Overall, the CF14JB5R10 through-hole resistor is a versatile and reliable component, capable of providing precise control over the impedance and current levels in a variety of applications. Its sealed construction and wide range of resistances make it ideal for damp environments, as well as applications that require precise control and adjustments.

The specific data is subject to PDF, and the above content is for reference