CF14JT18K0

Series:	CF
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	18 kOhms
Tolerance:	±5%
Power (Watts):	0.25W, 1/4W
Composition:	Carbon Film
Features:	Flame Retardant Coating, Safety
Temperature Coefficient:	0/ -500ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.091" Dia x 0.236" L (2.30mm x 6.00mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors are passive components used for electrical signal and power distribution in circuit designs. The components are used to provide resistance to a current flow. They are generally composed of resistive material, which acts as a conductor of electric current. The resistance of the material can be adjusted to provide either a very low or a very high resistance to the current flow. The resistive material used in through hole resistors can be metal, carbon, or a combination of both.The CF14JT18K0 is an example of a through hole resistor. It is a fixed-value resistor, meaning its resistance is constant and does not change over time. The resistance value is measured in ohms. The resistance value of a CF14JT18K0 is 18K ohms, meaning it has a resistance of 18,000 ohms.This component is can be used in a variety of applications. It is often used in power supply circuits, microphone preamplifiers, and audio circuits. In power supply applications, it is used to set the voltage regulator current limit. In microphone preamplifier applications, it is used to control the gain of the amplifier. In audio circuits, it is used to set the volume level.It generally features a 4 pin arrangement, with one end connected to a positive voltage and the other end connected to ground. The other two pins are connected to a voltage regulator, which controls the flow of current through the resistor. This allows the resistance level to be adjusted depending on the specific application.The working principle of a through hole resistor is simple. When a voltage is applied through the resistor, electric current flows through the resistive material, and the resistance of the material determines the amount of current that flows through it. If the voltage is increased, then more current will flow through the resistor; if the voltage is decreased, then less current will flow. This means that the resistance of the resistor can be used to control the amount of current that flows through it.Through hole resistors are suitable for applications that require accurate control of current levels and are often used in a variety of circuit designs. They are an essential component for most applications and can be found in every electronic circuit. The CF14JT18K0 is an example of a through hole resistor that is used in many electronic designs. It has a resistance value of 18K ohms and can be used to provide precise control of current in power supply, microphone preamplifier, and audio applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description