| Allicdata Part #: | 1.6EBK-ND |
| Manufacturer Part#: |
CFR-12JB-52-1R6 |
| Price: | $ 0.05 |
| Product Category: | Resistors |
| Manufacturer: | Yageo |
| Short Description: | RES 1.6 OHM 1/6W 5% AXIAL |
| More Detail: | 1.6 Ohms ±5% 0.167W, 1/6W Through Hole Resistor Ax... |
| DataSheet: |  CFR-12JB-52-1R6 Datasheet/PDF |
| Quantity: | 2551 |
| 1 +: | $ 0.04500 |
| 10 +: | $ 0.03465 |
| 25 +: | $ 0.02394 |
| 50 +: | $ 0.01863 |
| 100 +: | $ 0.01328 |
| 250 +: | $ 0.01035 |
| 500 +: | $ 0.00824 |
| 1000 +: | $ 0.00584 |
| 5000 +: | $ 0.00451 |
| Series: | CFR |
| Packaging: | Bulk |
| Part Status: | Active |
| Resistance: | 1.6 Ohms |
| Tolerance: | ±5% |
| Power (Watts): | 0.167W, 1/6W |
| Composition: | Carbon Film |
| Features: | -- |
| Temperature Coefficient: | -350/ +500ppm/°C |
| Operating Temperature: | -55°C ~ 155°C |
| Package / Case: | Axial |
| Supplier Device Package: | Axial |
| Size / Dimension: | 0.075" Dia x 0.134" L (1.90mm x 3.40mm) |
| Height - Seated (Max): | -- |
| Number of Terminations: | 2 |
| Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
A resistor is an electric component that limits an electric current and adapts the voltage levels between two points in a circuit, usually considered a passive component.
A Through Hole Resistor is a type of resistor whose leads pass through the device body and are secured in place with a metal sheet. Through Hole Resistors are made mainly from a ceramic core containing a spiral cut whose ends are connected to conductive materials, usually nickel chrome, which are also attached to the leads. These leads serve as the electrical terminals for the resistor.
CFR-12JB-52-1R6 is a Through Hole Resistor, with a power rating of 0.25W and resistance range from 1 to 6Ω. It is made of a ceramic core that is built to a 6 pin configuration. The pins are solid 1mm nickel chrome plated steel and designed for 1.27mm lead spacing.
The application field of CFR-12JB-52-1R6 is mainly in the automotive industry, where power supplies require a certain level of stability. This device can be used in power supply circuits, such as stabilizers, voltage regulators and amplifiers, where a low value resistor is necessary to limit the current. It can also be used in DC (Direct Current) motor or light dimmer circuits, where its small size and high performance makes it an ideal choice.
The working principle of CFR-12JB-52-1R6 is based on Ohm\'s Law. This law states that the current flow through a resistor is proportional to the voltage applied to it, and inversely proportional to the resistance of the resistor. In a circuit, a resistor can be used to reduce the amplitude of a signal by the ratio of the resistance to the total resistance. This ratio is called the voltage divider ratio. The CFR-12JB-52-1R6 can be used as a voltage divider in a power supply to make changes to the voltage at the device output.
The CFR-12JB-52-1R6 Through Hole Resistor is a reliable device that offers high precision due to its low resistance tolerance. Additionally, it has a high power rating and temperature characteristics that make it suitable for many applications. Its small size makes it an ideal choice for high-density board mounting and tight packaging.
The specific data is subject to PDF, and the above content is for reference
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...