CFR-25JB-52-2M4

Introduction

The CFR-25JB-52-2M4, classified as through hole resistors, is a specific component for its bypass, buffering and voltage divider applications. It is a two-pin surface mount device, which uses passive electrical components that control current or voltage levels. It is available in combination unit with both terminals (injection/de-injection) or either input or output side.

Application Field

The CFR-25JB-52-2M4 is mainly used for bypassing, buffering and voltage dividing, all of which are used in various electronic devices. This device is designed to reduce noise, help filter interference, and provide a wide frequency and gain control range for such applications as telecom, test and measurement, and medical equipment. Additionally, it is commonly used for motor drives, automotive, industrial, commercial, and home appliances.

Working Principle

The CFR-25JB-52-2M4 is a combination of two devices, with either an input or output side. Its fundamental working principle is based on the basic physics principles of voltage and current, with a resistor functioning as a medium to achieve this. Through hole resistors are designed to control the current or voltage levels by providing a limit to the amount of current or voltage passing through. For example, in the voltage divider application, the resistor limits the voltage, allowing the higher voltage input to be divided down to the desired output levels.

The working principle of the CFR-25JB-52-2M4 includes, thermal compensation, signal isolation, noise reduction, and increased frequency stability. Thermal compensation prevents the variation of the resistor’s resistance value due to temperature changes, while signal isolation allows for signals to pass through without any interference from external noise sources. Furthermore, noise reduction ensures that signal components are separated from unwanted noise components, and increased frequency stability provides increased frequency tolerance of the device.

Conclusion

In conclusion, the CFR-25JB-52-2M4 is a two-pin surface mount device with various applications including bypassing, buffering, and voltage dividing. It works using principles of voltage and current, with the resistor functioning as the medium that limits the voltage or current passing through. Additionally, the CFR-25JB-52-2M4 incorporates thermal compensation, signal isolation, noise reduction, and increased frequency stability to its working principle.