CFR-25JB-52-3M3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are a wide range of electrical components that provide passive electrical resistance for a variety of applications. The CFR-25JB-52-3M3 is one such resistor, designed for both general-purpose and high-power through-hole resistance.

CFR-25JB-52-3M3 Through Hole Resistors are built to last, with ceramic-based materials and robust constructions. This provides high temperature stability, strong mechanical strength, and excellent performance over a wide range of frequencies and temperature extremes. The resistor is rated for a maximum of 10 amps and 250 watts, with a typical resistance of 25 ohms.

The CFR-25JB-52-3M3 is designed for use as a surge protection device, a voltage regulator, a current limiter, a thermocouple compensator, or as a load resistor. It can also be used as a high temperature, low-noise amplifier, or even a low-noise diode protector. In addition, it can be used in high current or high voltage circuits to offer additional protection against overloads, short-circuits, and other potentially harmful events.

The working principle of the CFR-25JB-52-3M3 is based on the concept of electrical impedance. This is the resistance that occurs when two conductive mediums interact. In the case of the resistor, the two mediums are the carrier and the resistor itself. When current passes across the resistor, it will vary depending on the resistance value of the resistor.

This is because a resistor\'s electrical impedance varies with the resistor\'s current. For instance, as current increases, the impedance of the resistor also increases. Similarly, when the current decreases, the impedance of the resistor also decreases. This variation of the resistance value allows the resistor to act as a current limiter or regulator, or to offer more protection against overloads and other damaging events.

When installing the CFR-25JB-52-3M3, it is important to pay close attention to the type of resistor and the connections. The type of connections should match the type of resistor, as resistance will diminish if the wrong type of connection is used. In addition, the connections must be soldered correctly and tightened securely to ensure proper operation. Also, when using a high-power resistor, the connections should be insulated to prevent overheating and damage.

The CFR-25JB-52-3M3 Through Hole Resistor is a versatile and long-lasting component capable of protecting against overloads and other potentially damaging events. Its versatile design allows it to be used in a wide variety of applications and settings, and its robust construction ensures high temperature stability, strong mechanical strength, and excellent performance. The resistor is designed with ceramic-based materials to withstand extreme temperatures and frequencies, making it an excellent choice for use in high-voltage, high-power applications.

The specific data is subject to PDF, and the above content is for reference