CFR-25JT-52-3M3

Series:	CFR
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	3.3 MOhms
Tolerance:	±5%
Power (Watts):	0.25W, 1/4W
Composition:	Carbon Film
Features:	--
Temperature Coefficient:	0/ -1500ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.094" Dia x 0.248" L (2.40mm x 6.30mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Throughhole ResistorsThroughhole Resistors are an important type of passive electrical components which are widely used in various electrical and electronic circuits. In modern day electrical and electronics applications, Throughhole Resistors are preferred over alternative resistor types such as surface mount resisters, discrete wirewound resistor etc due to their simple construction, four terminal design and better power rating. They are easy to mount on printed circuit boards and can take more energy than the other types of resistors. The CFR-25JT-52-3M3 is one such type of throughhole resistor and is typically used for applications demanding high power and stability. It has a rating of 25 watts and a resistance value of 52 ohms. Construction wise it consists of a cylindrical cylindrical body with four terminals distributed evenly along its perimeter – a center hole, a one side hole, a two-side hole, and a three-side hole. The working principle of the CFR-25JT-52-3M3 is quite simple. It works on the principle of Ohm’s law by using a resistive material which opposes the flow of current in proportion to voltage applied across it.When a voltage is applied across the two terminals of the resistor, the current passing through it is reduced proportionally. This current reduction is then used to calculate various parameters like amperage, wattage etc. This resistance value is usually measured in ohms and signifies the amount of current that can be passed through the resistor for a given voltage.The primary benefit of the resistor is that it can be used to control the voltage and current of a given electrical circuit. Depending on the resistor’s wattage and resistance, it can be used for precision applications such as high frequency circuit design and amplifier implementations. It can also be used to convert AC to DC and regulate the current. It can also be used to control voltage levels in circuits or to limit the current in a given circuit.Due to its higher power rating and four terminal design, the CFR-25JT-52-3M3 is typically used in a wide variety of applications such as high-power electronic circuits, measurement electronics, lighting systems, switching power supplies and battery chargers. It is also used in various industrial control systems, communication systems, robotics and automotive electronics.In conclusion, the CFR-25JT-52-3M3 is a very versatile and reliable through hole resistor, with a wide variety of applications. Its four terminal design, higher power rating and its working principle based on Ohm’s law make it a preferred choice for various applications. It’s precisely controlled resistance and its ability to convert AC to DC is of particular importance for modern day electrical and electronic applications.

The specific data is subject to PDF, and the above content is for reference