CFR-50JT-52-270K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors are components used in many electrical engineering applications to limit current flow, enlarge electrical polarity, and terminate or decrease the voltage level. In this area, the CFR-50JT-52-270K can be found used in a variety of settings. Here, we will explore the applications and working principles of the CFR-50JT-52-270K resistor.

The CFR-50JT-52-270K is a through hole resistor, constructed with a floating package design and a sealed metal ferrule connection. The resistor is rated for up to 50 watts and 100 volts of continuous voltage and delivers a maximum power of 270kΩ. It has a Leaded Pitch of 2.54mm and can be attached to a board by soldering a joint.

Given its construction, the CFR-50JT-52-270K is suitable for a variety of through hole resistors applications. It is most commonly used in electrical circuits where heat dissipation needs to reach extreme levels, such as in loud speakers, power lines, or large-scale rectifier boards. It is also used extensively for terminating sensitive electrical signals such as microamp level components in mixed-signal circuitry. In addition, the CFR-50JT-52-270K can also be used in high-frequency applications due to its low impedance and tight tolerance over temperature.

The CFR-50JT-52-270K works on the principle of resistance, which is the measure of opposition to electric current flow. Even though the resistance is consistent, the reactance varies according to the frequency of the applied voltage. Resistance caused by resistors decreases with an increase in frequency. This is beneficial for many high-frequency applications, as lower reactance results in lower power consumption and higher efficiency.

Aside from high-frequency applications, resistors can be used for a range of other purposes. For instance, resistors are often used with a capacitor or inductor in a low-pass filter circuit to control flow of electrical signals within a circuit. Similarly, the resistor can also be used to convert an AC signal into a DC signal by passing a given voltage through a resistor. In addition, resistors are often used in series and parallel circuits, to regulate current flow according to the desired application.

The CFR-50JT-52-270K is constructed with tightly wound protective layers and advanced soldering technology, allowing it to withstand harsh environmental conditions and to prevent electricity from short-circuiting or grounding out. Furthermore, the resistor is designed to be thermally stable and meets the TUV, RoHS, and SGS standards. All of these features make it ideal for a variety of commercial-grade and industrial-grade applications.

In conclusion, the CFR-50JT-52-270K can be used in a wide variety of through hole resistors applications. While its primary purpose is to limit current flow, it can also be used to convert AC signals into DC signals, to terminate sensitive electrical signals, and to regulate current in series and parallel circuits. Furthermore, its tight tolerance over temperature combined with its protective layers and advanced soldering technology make it a durable and reliable resistor for high-temperature and high-voltage applications.

The specific data is subject to PDF, and the above content is for reference