CFR-50JT-52-510K Resistors

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors refer to resistors that have two lead wires that can be soldered to the substrate. The CFR-50JT-52-510K application field and working principle is applied in this type of resistor. In this article, we shall discuss the application field and working principle of the CFR-50JT-52-510K through hole resistor.

Application Field

The CFR-50JT-52-510K through hole resistor is used mainly for circuit applications. Specifically, the resistor is typically installed on PCBs, where it is used to control the flow of an electrical current. The resistor can be used in a wide variety of applications, ranging from AC/DC power controls to household appliances. It is also used for other industries such as aerospace and automotive.

Working Principle

The working principle of the CFR-50JT-52-510K through hole resistor is relatively simple. When the voltage applied to the resistor increases, the current flowing through the resistor will also increase. This is known as Ohm’s Law, which states that “the current is inversely proportional to the resistance.” Therefore, when the current increases, the resistance of the resistor also increases, thereby reducing the current. This is the basic principle of how the CFR-50JT-52-510K through hole resistor operates.

Construction

The CFR-50JT-52-510K through hole resistor is typically composed of a metal or ceramic based substrate, which contains metal oxide layers. The substrate is typically covered with a protective coating which protects the metal oxide layers from environmental factors such as weather, chemical or atmospheric changes. The metal oxide layers are soldered onto the substrate with a heatsink to help dissipate the heat generated by the resistor. This helps the resistor to operate efficiently for a longer period of time.

Resistance Value

The resistance value of a CFR-50JT-52-510K through hole resistor is determined by the size of the holes in the substrate. The size of the holes in the substrate affects the amount of current that can flow through the resistor. Larger holes in the substrate increases the resistance, while smaller holes reduce it. The resistors are identified by a three or four-digit code that indicates the resistance value.

Temperature Rating

The CFR-50JT-52-510K through hole resistor has a thermal rating which indicates the maximum temperature that the resistor can withstand. The thermal rating is usually indicated on the resistor’s packaging. It is important to select resistors that are rated for the temperature of the application area, as too high of a temperature rating can cause damage to the resistor.

Conclusion

The CFR-50JT-52-510K through hole resistor is a commonly used resistor for many circuit applications. Its application field ranges from AC/DC power controls to household appliances, as well as other industries such as aerospace and automotive. The working principle of the resistor is based on Ohm’s Law. The size of the holes in the substrate determines the resistance value, while the thermal rating indicates the maximum temperature that the resistor can withstand.

The specific data is subject to PDF, and the above content is for reference