CFR50J360R

Series:	CFR50, Neohm
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	360 Ohms
Tolerance:	±5%
Power (Watts):	0.5W, 1/2W
Composition:	Carbon Film
Features:	--
Temperature Coefficient:	0/ -450ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.118" Dia x 0.354" L (3.00mm x 9.00mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction of Through Hole Resistors

Through-hole resistors are electrical resistors with a large metal body that is mounted through a hole in the printed circuit board (PCB). They are typically used in applications that require a moderate amount of accuracy, and are usually preferred over surface mount resistors in high-density circuits, since they require fewer holes in the PCB. They are also used in applications that require a higher degree of reliability or vibrational resistance.

CFR50J360R Through Hole Resistor

The CFR50J360R is a through-hole resistor that is often used in high power applications. It has a total power rating of 50 watts, which makes it ideal for applications such as power supplies and power amplifiers. It also features a rated resistance of 0.360 Ohms, which is relatively low compared to other high power resistors.

CFR50J360R Application Field

The CFR50J360R is a versatile resistor that can be used in a variety of applications. It has been used successfully in a variety of power supply applications, such as power supplies for industrial equipment, communications equipment, medical equipment, and even transportation. In addition, it is also widely used in power amplifiers, audio systems, and photocells.

CFR50J360R Working Principle

As with all through-hole resistors, the CFR50J360R works by dissipating energy as heat. This is done by the resistor\'s resistance, which causes the current passing through it to dissipate as heat. The heat is then dissipated into the air by natural convection or by forced air cooling. Since the CFR50J360R is rated for 50 watts, it can dissipate a large amount of heat, allowing it to be used in high power applications.

Conclusion

The CFR50J360R is a versatile through-hole resistor that is capable of handling a significant amount of power. It is used in a variety of industrial, medical, and consumer applications, and can be used for a wide range of power supply and power amplifier applications. The resistor works by dissipating energy as heat, which is then dissipated into the air by natural convection or forced air cooling.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description