CFR50SJT-52-910R

Series:	CFR
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	910 Ohms
Tolerance:	±5%
Power (Watts):	0.5W, 1/2W
Composition:	Carbon Film
Features:	--
Temperature Coefficient:	-350/ +500ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.094" Dia x 0.248" L (2.40mm x 6.30mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors, or THR or TH resistors, are wirewound resistors designed to fit through a hole in a printed circuit board. They provide current control in circuitry and are used to divide and regulate voltage levels. The efficiency and reliability of THR resistors make them ideal for general purpose applications, including radios, stereos, and any circuit that needs the minimum change in value over time.The CFR50SJT-52-910R is a through-hole resistor ideal for applications requiring a huge current capacity. This resistor is designed for high power applications in which high currents are needed, such as audio amplifiers, switching power supplies, and medical equipment. It boasts a wide resistance range of 1 Ω to 22 kW, and can handle continuous and peak currents up to 2.5 A and 6.7 A, respectively.The CFR50SJT-52-910R has numerous advantages over other through-hole resistors, such as its low-inductance design. This means that input capacitance is not significantly affected by the presence of the resistor, which is critical for high-fidelity audio applications. In addition, its flame retardant body ensures that the component meets safety requirements for public-accessible electronics. The resistor is also shielded from interference, making it suitable for sensitive medical applications that require reliable operation.The working principle of the CFR50SJT-52-910R is based on Ohm’s law. According to this law, when a potential difference (voltage) is applied across two ends of a conductor, a current is established that is proportional to the resistance of the conductor. In the case of the CFR50SJT-52-910R, the potential difference applied across the resistor creates a current that passes through it. The current is regulated by the resistor’s resistance, which is determined by its composition and construction. The resistor is composed of resistive material that limits the flow of current and can be accurately calibrated to a specific resistance.The CFR50SJT-52-910R is a reliable and resilient through-hole resistor suitable for a variety of applications. Its low-inductance design and flame retardant body make it safe for use in public-accessible electronics, while its shielded design makes it ideal for sensitive medical applications. The resistor works by regulating the current that passes through it according to its composition and construction, as determined by Ohm’s law.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description