CM04ED680GO3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Mica and PTFE Capacitors

Mica and PTFE capacitors are components used in audio electronics, medical equipment, and industrial devices. They are also used in other high power applications such as power supplies and surge protection.

CM04ED680GO3 is an example of mica and PTFE capacitors. It is a popular component used in various applications, such as filtering, decoupling, bypassing, and power supply. These capacitors have a relatively large capacitance and an extremely low ESR, allowing them to address high-frequency noise, transient spikes, and spikes that occur due to tight load conditions. They provide excellent temperature stability in a variety of applications.

Application Field for CM04ED680GO3

CM04ED680GO3 capacitors can be used for a number of applications. They are widely employed in medical equipment, audio applications, high-power industrial devices, and for the suppression of transient disturbances. Its common use is in the bypass circuit of LED driver converters, inductor circuit, and line filter circuits.

Working Principle

The working principle of CM04ED680GO3 capacitors is simple. It consists of two metalized electrodes, which are insulated from each other by a dielectric layer. This dielectric layer is usually made of PTFE and mica. When a voltage is applied, the two metalized electrodes act as capacitors, which consequently block the flow of current in one direction while allowing the current to pass freely in the opposite direction.

The capacitor can also act as a low-pass filter, which is a circuit element that can efficiently reduce the high-frequency components of a digital signal. This allows the low-frequency components of the signal to pass through, while the high-frequency components are attenuated. This helps to avoid any interference and obtain maximum fidelity.

The high frequency noise is also reduced to a minimum with the help of this capacitor. The main application of this capacitor is in transient spike suppression, where the high frequency noise spikes generated during a surge are cut off and the voltage spikes are calmed down. This allows the device to carry on its operations without any disruptions.

Conclusion

Mica and PTFE capacitors, such as CM04ED680GO3, are used widely in various applications, making them extremely beneficial and versatile components. They are widely used in audio electronics, medical equipment, and industrial devices. Their most important features are their extremely low ESR, excellent temperature stability, and their ability to address transient spike suppression.

The specific data is subject to PDF, and the above content is for reference