CM05FD910GO3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Mica and PTFE capacitors, such as CM05FD910GO3, are among the most widely used types of capacitors for their various advantages, including high performance, high reliability and low leakage current. The CM05FD910GO3 type is a surface mount mica and PTFE capacitor with a voltage rating of 10 volts. It consists of two layers of mica capacitance materials and an insulating PTFE film.

CM05FD910GO3 capacitors are suitable for general-purpose applications where space-saving design is desired. The capacitance of the capacitor is typically given in microfarads (uF) and determines the amount of electrical charge it can store. CM05FD910GO3 capacitors typically range from 0.22μF to 4.7μF. They can be used in circuits for applications such as filtering, timing, equalization, and pulse shaping.

The working principle of a CM05FD910GO3 capacitor is based on Faraday\'s law which states that when a conductor is placed in a changing electric field, a current is induced in which charges are stored and discharged. This capacitor works similarly in that charges are stored and discharged in the capacitor when a voltage is applied.

When a voltage is applied across the capacitor, electric charge is moved from one side of the capacitor to the other, and it establishes an electrostatic field in the dielectric material between two plates. The storage capacity of the capacitor is determined by the quality of the dielectric material used, the amount of charge stored within the capacitor, and the total capacitance of the two plates. The capacitance of the CM05FD910GO3 is greatly increased when the operating voltage is increased.

The CM05FD910GO3 capacitor can be used for both AC and DC applications. In the case of AC applications, the capacitor functions like a resistor, acting as a low-pass filter and blocking the higher frequency components of the signal while allowing the lower frequency components to pass through. In DC applications, the capacitor acts as a filter to reduce noise and eliminate high-frequency interference.

The CM05FD910GO3 capacitors have a high current capability and are capable of handling high surge current peaks as well as continuous DC current. The dielectric material used gives these capacitors superior temperature stability, high reliability, and robustness. The CM05FD910GO3 capacitors can withstand temperatures up to 150°C and can be used in applications where high temperature stability is required.

Overall, the CM05FD910GO3 capacitor is a highly reliable device for many applications including filtering, timing, equalization, surge protection, and power supplies. The improved performance, high temperature stability, and robustness of this device make it an ideal choice for various industrial and consumer applications.

The specific data is subject to PDF, and the above content is for reference