CM309E24000000ABIT

Series:	CM309E
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	MHz Crystal
Frequency:	24MHz
Frequency Stability:	±50ppm
Frequency Tolerance:	±30ppm
Load Capacitance:	16pF
ESR (Equivalent Series Resistance):	40 Ohms
Operating Mode:	Fundamental
Operating Temperature:	-10°C ~ 60°C
Ratings:	--
Mounting Type:	Surface Mount
Package / Case:	4-SOJ, 9.60mm pitch
Size / Dimension:	0.461" L x 0.157" W (11.70mm x 4.00mm)
Height - Seated (Max):	0.146" (3.70mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Crystals: CM309E24000000ABIT Application Field and Working PrincipleCrystals are widely used in many applications today. This type of material is composed of a solid, crystalline structure that has a certain frequency and is often used in oscillators, filters and tuning circuits. One such crystal is the ABIT CM309E24000000ABIT, which is a 24 MHz clock oscillator, also known as a crystal oscillator.The ABIT CM309E24000000ABIT crystal oscillator was specifically designed to provide a highly accurate frequency of oscillation while limiting EMI radiation. It is composed of a quartz crystal and is usually soldered onto a circuit board. The crystal is mounted in a holder with the quartz crystal facing the board, and the crystal itself is enclosed in quartz epoxy. The device is then sealed with a special coating and a trimming capacitor is installed to adjust the frequency. This allows for a more stable frequency and reduces the need for calibration. The quartz crystal provides the frequency stability and accuracy, while the trimming capacitor allows for fine tuning.The ABIT CM309E24000000ABIT crystal oscillator operates at 24 MHz and has a frequency stability of ±100 ppm. The device is rated at 0.3 Watts and has an outputCM309E24000000ABIT impedance of 15kΩ. It also has a rise/fall time of 0.8 in/out, which is good for most applications when frequency stability is critical. The ABIT CM309E24000000ABIT is ideal for use in a variety of applications such as telecommunications, automotive, automotive electronics, medical equipment, and more.The working principle of a crystal oscillator is similar to that of any other type of oscillator. It consists of a quartz crystal with a pair of electrodes on either side. When a voltage is applied to the electrodes, the quartz crystal vibrates at a very specific frequency, known as its resonant frequency. The frequency at which the crystal oscillates can be adjusted by varying the applied voltage. This is done by adding capacitors or inductors in series or parallel with the quartz crystal, which can cause the frequency of the oscillations to either increase or decrease.The ABIT CM309E24000000ABIT crystal oscillator is a highly reliable and stable device for a variety of applications. Its ease of use and its wide frequency range make it an ideal choice for applications where frequency stability is a must. Its low power consumption and low output impedance allows for efficient and cost effective operation. The ABIT CM309E24000000ABIT crystal oscillator is a great choice for any application where accuracy and precision of frequency is needed.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description