CM309S4.096MABJT

Series:	CM309S
Packaging:	Tape & Reel (TR)
Part Status:	Obsolete
Type:	MHz Crystal
Frequency:	4.096MHz
Frequency Stability:	±50ppm
Frequency Tolerance:	±30ppm
Load Capacitance:	18pF
ESR (Equivalent Series Resistance):	150 Ohms
Operating Mode:	Fundamental
Operating Temperature:	-10°C ~ 60°C
Ratings:	--
Mounting Type:	Surface Mount
Package / Case:	4-SOJ, 9.40mm pitch
Size / Dimension:	0.488" L x 0.173" W (12.40mm x 4.40mm)
Height - Seated (Max):	0.146" (3.70mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Crystals

Crystals are used in many aspects of modern technology, including for use in CM309S4.096MABJT applications. Crystals are used as mechanisms to accurately control the frequency of a signal. This article will discuss the application field and working principle of CM309S4.096MABJT crystals.CM309S4.096MABJT is a type of crystal oscillator developed by ERS Manufacturing. It is a high-frequency oscillator that offers accuracy up to ±50ppm, and operates in the range of 10.00 to 19.99 MHz. The crystal oscillator is typically used in a variety of broadcast and communications systems, as well as in test instrumentation and product development. In its most basic configuration, the CM309S4.096MABJT crystal oscillator consists of a piezoelectric crystal enclosed in an oscillator package. The crystal is connected between two electrodes on the surface of the package. When a voltage is applied across the electrodes, the crystal vibrates and generates an electrical signal. This signal is then amplified and used to control the frequency of the signal that is transmitted. The frequency of the output signal is determined by the crystals internal design, which is based on the quarz crystal\'s physical properties. The crystals piezoelectric properties cause it to vibrate at a certain frequency when a voltage is applied to it. The frequency of vibration is determined by the size of the crystal and its construction. The size and construction of the crystal determines the frequency at which it will vibrate and the frequency of the signal it will generate when voltage is applied to it. Once the crystal has been constructed, it must be adjusted to the precise frequency desired. This is done using a number of techniques, such as using phase locked loop circuits, and by using external components to adjust the frequency. Once it has been calibrated, the CM309S4.096MABJT crystal oscillator can be used in any number of applications where accurate frequency control is necessary.CM309S4.096MABJT crystall oscillators are used in a wide variety of applications, including in radio and television transmitters, digital signal processors, satellite receivers, data networks and test instrumentation. The high accuracy of the crystal makes it ideal for use in these applications, where precise timing is essential. In summary, CM309S4.096MABJT crystals are used in many applications where accurate frequency control is required. The crystals are constructed from a piezoelectric material, which generates an electrical signal when a voltage is applied to it. The frequency of the electrical signal is determined by the size and construction of the crystal. Once it has been adjusted to the desired frequency, the crystal can be used in a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description