Allicdata Part #: | CMC-09-ND |
Manufacturer Part#: |
CMC-09 |
Price: | $ 4.87 |
Product Category: | Filters |
Manufacturer: | RECOM Power |
Short Description: | COMMON MODE CHOKE 3.3A 2LN TH |
More Detail: | 2 Line Common Mode Choke Through Hole 3.3A DCR 10... |
DataSheet: | CMC-09 Datasheet/PDF |
Quantity: | 1000 |
28 +: | $ 4.42260 |
Voltage Rating - AC: | -- |
Package / Case: | Horizontal, 4 PC Pin |
Height (Max): | 0.346" (8.80mm) |
Size / Dimension: | 0.433" L x 0.433" W (11.00mm x 11.00mm) |
Mounting Type: | Through Hole |
Features: | -- |
Approvals: | -- |
Ratings: | -- |
Operating Temperature: | -40°C ~ 105°C |
Series: | CMC |
Voltage Rating - DC: | -- |
DC Resistance (DCR) (Max): | 10 mOhm |
Current Rating (Max): | 3.3A |
Number of Lines: | 2 |
Filter Type: | Power Line |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
A Common Mode Choke, or CMC, is a type of inductor used to reduce common mode electric and magnetic interference. It works by providing a load, often in the form of a large coil, which limits the flow of common mode signals. Generally, this is done using a high-frequency signal, also known as a common mode filter. CMC-09 is an application field of common mode chokes and therefore how it works will be discussed in this article.
In general, CMC-09 is a type of common mode choke with a high inductance of up to 9kH. It is designed to reduce the common mode interference on the balanced signal path, both within a network system and between multiple networks. The filter operates on the principle that an inductor can represent a magnetic field that acts as a barrier, thus limiting the passage of electromagnetic signals. CMC-09 performs this by providing a voltage drop across its winding, thus creating a potential difference between its two sides and blocking any conduction through it.
The design of the CMC-09 application field employs several layers of windings that are wound in different directions. This serves to cancel out any potential variations in the field of the current within each winding, resulting in a more uniform and consistent impedance profile. It is commonly used in power electronics and communications systems, and helps to protect their signal integrity from interference. In general, the CMC-09 is an effective way of reducing the effects of various forms of interference, including noise, hum and crosstalk.
The working principle of common mode chokes is based on the fact that an inductor can be used to limit the flow of electromagnetic signals. A common mode choke presents a high impedance to higher frequency signals while allowing low frequency signals to pass more easily. Higher frequency signals are more likely to undergo dispersion as well as other forms of signal distortion if allowed to pass through a common mode choke. By using a common mode choke, it is possible to effectively reduce the amount of interference present in a system.
This is ideal for a wide range of applications where it is necessary to filter out unwanted high-frequency signals while maintaining the signal integrity of the lower frequency ones. CMC-09 is used especially in power electronics and communication systems, where it helps to drastically reduce interference and protect the integrity of transmitted signals.
In conclusion, the CMC-09 application field is an effective way of reducing the effects of common mode electric and magnetic interference. Its design uses several layers of windings which are wound in different directions, providing a high impedance to higher frequency signals and allowing lower frequency signals to pass through more easily. It is most commonly used in power electronics and communication systems, where it helps to protect the signal integrity and reduce the amount of interference present within the system.
The specific data is subject to PDF, and the above content is for reference
CMC 100MH 400MA 2LN TH100mH @ 10kHz 2 Li...
COMMON MODE CHOKE 27MH 1A 2LN TH27mH @ 1...
CMC 3.3MH 1.2A 2LN TH3.3mH @ 10kHz 2 Lin...
COMMON MODE CHOKE 13MH 2A 2LN TH13mH @ 1...
COMMON MODE CHOKE 1.3A 2LN TH2 Line Comm...
COMMON MODE CHOKE 1MH 20A 2LN TH1mH @ 10...