CMF-SD25A-2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PTC resettable fuses are one of the most common forms of electronic circuit protection available today. This type of overcurrent protection provides a way to reconnect a device in the event of an overcurrent, without the need to replace a fuse. CMF-SD25A-2 is one such device, designed to limit inrush current and provide overcurrent protection for high-power electronic circuits.

The CMF-SD25A-2 PTC resettable fuse consists of an encased thermistor which acts as a temperature sensitive resistor. When the current passing through the thermistor exceeds its rated value, the temperature of the thermistor rises, causing it to increase its resistance substantially. This large increase in resistance will limit the current through the device, and protect the circuit from further damage.

The CMF-SD25A-2 has been designed for a very specific application field. It is most commonly used in high-power electronic circuits such as motor drives, electric vehicles, and power supplies. The device is designed to be able to limit the initial inrush current that occurs when large amounts of power are suddenly supplied to an electronic circuit. This initial surge of current can be damaging to the rest of the circuit and may cause further damage if uncontrolled. The CMF-SD25A-2 is designed to limit the inrush current and provide maximum circuit protection.

In addition to its use in high-power circuits, the CMF-SD25A-2 can also be used in low-power circuits such as consumer electronics. It is often used in circuits where normal fuses may not be suitable, such as in circuits with a large number of sensitive components. The PTC resettable fuse allows for the device to be easily reset in the event of an overcurrent, without the need to replace the fuse.

The working principle of the CMF-SD25A-2 is straightforward. When the current through the thermistor exceeds its rated value, the temperature of the thermistor rises. This causes the resistance of the thermistor to increase, limiting the amount of current passing through the device and protecting the rest of the circuit. The thermistor will reset to its original state when the current is reduced and cooled back down.

The CMF-SD25A-2 is a reliable and cost-effective form of overcurrent protection for a wide range of applications. It is easy to install, requires no maintenance, and provides a quick response time. With its ability to easily reset in the event of an overcurrent, it is a very attractive option for circuits where normal fuses are not suitable.

The specific data is subject to PDF, and the above content is for reference