CMF0710R000GNEB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are the most widely used resistors in electronic circuit design. They are used to provide circuit protection from overvoltage, overcurrent, and misoperation caused by voltage or current surges. A through hole resistor is a device that has two leads that are connected by a gap or break in the lead. The gap is filled with different materials, such as resistive material or insulating material, depending on the desired application.

CMF0710R000GNEB is a Through Hole Resistor that is designed for a variety of applications. It has a lead that is 1.6mm in length and 2.5mm in diameter, as well as a junction temperature range from -25°C to asphalt. It is designed to be used in deep-hole applications, SMT applications, and various other applications where high surge current flows are needed.

The main application field of the CMF0710R000GNEB is that it can be used in high surge current flow applications. These applications require a resistor that can handle very high currents, but also will not be prone to overheating. The CMF0710R000GNEB is designed to be capable of handling these high surge currents without failing or overheating.

The working principle of the CMF0710R000GNEB is based on the concept of ohmic resistance. When a voltage is applied across the leads of the resistance, it creates a resistance between the two leads. This resistance causes the current to decrease as it passes through the resistor. The resistor can be adjusted to provide a specific voltage and current when a given voltage is applied across it.

To further understand the working principle of the CMF0710R000GNEB, it is important to understand the physical structure of the resistor. The resistor is composed of a conductor and an insulating material. The conductor, which is the portion of the resistor that is of interest, is made up of two layers. One layer is known as the substrate layer and the other layer is known as the shield layer. The substrate layer is composed of a resistive material that is responsible for controlling the current flow. The shield layer is an insulating material that prevents the current from leaking out.

Once the applied voltage is applied across the two leads, the current begins to flow through the conductor, and the resistive material provides the desired amount of resistance. This resistance limits the current flow to the desired level and is the key to the successful operation of the CMF0710R000GNEB.

In addition to its use in high surge current flow applications, the CMF0710R000GNEB can be used in other applications that require a resistor with a high resistance value. These applications include surge protection, noise attenuation, and current control.

The CMF0710R000GNEB is a Through Hole Resistor designed for a variety of applications. It is designed to be used in applications where high surge current flow is needed, and it works on the principle of ohmic resistance. It is composed of a conductor and an insulating material, and it provides a resistive material to control the current flow. The CMF0710R000GNEB can be used in a variety of applications, including surge protection, noise attenuation, and current control.

The specific data is subject to PDF, and the above content is for reference