CMF07200K00GNR680

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors, such as CMF07200K00GNR680, are electrical components used to limit, adjust or measure electric current in an electrical circuit. The resistor works by providing a specific and fixed quantity of resistance, usually measured in ohms (Ω). In addition, through hole resistors contribute to the stability of the circuit, limit the current, and dampen the electrical signal. During installation, they must be screwed or soldered directly into a board.

The CMF07200K00GNR680 resistor is a general purpose, through hole resistor with a lead spacing of 7.2mm. It is typically used in automotive (vehicle) and off-road electronics applications, such as climate control, engine controllers, instrumentation and audio systems. The resistor contains a metal-based film that has been specificallyheat-treated to provide a wide temperature range. It is rated at 200K ohms with a power rating of 0.2W, and 0805 metric size.

The working principle of a through hole resistor is based on the properties of the materials used to manufacture it. The resistor typically consists of two pieces of conductive metal (typically copper or aluminum) that are separated by an insulating material, usually ceramic, plastic, or mica. The amount of resistance of the resistor is dependent on the materials used and the length and width of the resistor. As current passes through the resistor, it is opposed by the resistance of the resistor, creating a voltage drop across the resistor. This in turn causes energy to be dissipated as heat, which helps prevent thecircuit from overloading.

When a through hole resistor is connected to a circuit, it will reduce the current flowing through the circuit and can be used to protect the circuit from overload. In addition, by adjusting the resistor\'s value, a given output voltage or current can be achieved. It is also commonly used in analog circuits to provide a reference voltage, or in digital circuits for power up/down applications. The resistor is also used to provide electrical filtering, protect the circuit against transients, and reduce noise.

Through hole resistors are designed to operate in a wide range of conditions and provide reliable performance over a long service life. They are available in a variety of shapes, sizes, and materials, so it is important to select the resistor that is best suited to the application. It is also important to consider the wattage rating, minimum operating temperature, maximum operating temperature, and power dissipated when selecting the appropriate resistor.

The specific data is subject to PDF, and the above content is for reference