CMF50100K00FEBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are devices used in many different electronics applications. The CMF50100K00FEBF is one such device that is used in many of these applications. This article will discuss the application field and working principle of the CMF50100K00FEBF.

The CMF50100K00FEBF is a through-hole resistor designed for use in general-purpose electronic applications. It is a non-inductive resistor that has a nominal resistance value of 100kohm at 25°C. The resistor has a maximum power rating of 2W, and its rated temperature range is from -65°C to +150°C. It also has a voltage rating of 250V. The body size for the CMF50100K00FEBF is 7.2mm x 8.5mm x 2.5mm. The resistor is constructed with an epoxy/glass composite body and has a tolerances of ±1%.

The CMF50100K00FEBF can be used in a wide variety of electronic applications, including power supply circuits, analog circuits, control circuits, and signal circuits. It can be used as a voltage divider or a current limiter. It can also be used as a load resistor in a linear regulator circuit, or as a damping resistor in an oscillator circuit. Additionally, it can be used to provide protection against over-voltages or transient voltage spikes.

The CMF50100K00FEBF utilizes a field-effect conductive principle for operation. This means that when an electric field is applied to the resistor, it becomes conductive. The electric field can be generated either through current passing through the resistor, or by applying a voltage across it. When current passes through the resistor, the field-effect principle causes the resistor to reduce its resistance according to the magnitude of the current. This allows the resistor to function as a load resistor in linear regulator circuits, as well as in current limiting devices.

The CMF50100K00FEBF also utilizes a temperature-dependent resistance characteristic that allows the resistor to protect circuits from over-voltage or high-temperature conditions. This is because as the temperature of the resistor increases, its resistance value decreases. This helps to protect circuits from excessive current or voltage, as the resistor can act as a current limiter or voltage divider. It is for this reason that the CMF50100K00FEBF can be used in high temperature applications.

In conclusion, the CMF50100K00FEBF is a through-hole resistor designed for use in general-purpose electronic applications. It can be used as a voltage divider or a current limiter, as well as in linear regulator circuits and oscillator circuits. The CMF50100K00FEBF uses a field-effect conductive principle for operation, as well as a temperature-dependent resistance characteristic for protection against over-voltage or high-temperature conditions. This makes it a versatile resistor for a variety of applications.

The specific data is subject to PDF, and the above content is for reference