CMF5020K000BHR6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors, such as CMF5020K000BHR6, are used in a wide range of applications. They are used to create circuits with a specific resistance, as well as to measure voltage or current. By using a resistor, an electrical current can be divided, or a signal can be diverted. The technology used in during hole resistors is simple yet efficient, making them one of the most widely used components in electronics.

What is CMF5020K000BHR6?

CMF5020K000BHR6 resistors are a type of through hole resistors. These resistors have a ½ watt rating, with a maximum working voltage of 50V and a maximum power dissipation of 200mW. The CMF5020K000BHR6 has a tolerance of ±5%, which means its output could be up to 5% different from the input. They also have a typical application frequency of 0-500MHz.

Applications of CMF5020K000BHR6 Through Hole Resistors

Through hole resistors are used in a variety of different applications, ranging from domestic to industrial electronic devices. Some of the most common applications for CMF5020K000BHR6 through hole resistors include:

• Power amplifier circuits: Through hole resistors are used in power amplifier circuits to help divide or divert the electrical current.
• Electronic circuits: Through hole resistors act as resistors in electronic circuits, helping to regulate the flow of current.
• Automotive wiring: Through hole resistors are used in automotive wiring to help protect sensitive electronic components.
• Data transmission systems: Through hole resistors can help filter out noise signals and provide a clean signal for data transmission.

Working Principle of CMF5020K000BHR6 Through Hole Resistors

The working principle of CMF5020K000BHR6 through hole resistors is based on electrical resistance. The CMF5020K000BHR6 is a type of resistor that controls electrical current through a conductor. It is made up of a material such as carbon or metal oxide that impedes the flow of electrons, resulting in a voltage drop across the resistor. The resistance of the resistor is measured in ohms and is determined by the material used and its size.

When a voltage is applied to the resistor, the electrons flow from the positive terminal to the negative terminal through the material, causing a voltage drop across the resistor. This voltage drop is limited by the amount of resistance the resistor offers, with a higher resistance resulting in a larger voltage drop. By adjusting the resistance of the resistor, the current in the circuit can be controlled.

Conclusion

The CMF5020K000BHR6 through hole resistors are a widely used electronic component that is widely used in a variety of different applications. These resistors offer a maximum working voltage of 50V, with a resistance of ±5%. They are used to help control the flow of current in circuits, with the resistance of the resistor dictating the amount of voltage drop across the resistor. Through hole resistors are a simple and effective way to create resistive circuits.

The specific data is subject to PDF, and the above content is for reference