CMF55147K00FKBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors, also known as axial resistors, refer to resistors whose leads extend out of the sides of the component. The advantage of this type of resistor is that additional components, such as capacitors or other devices, can be easily wired up to the ends of the resistor leads. The leads of through-hole resistors, unlike other resistor types, can be bent and soldered to the board to improve the stability of the connections. The CMF55147K00FKBF is a through-hole resistor that is commonly used in a variety of applications.

The CMF55147K00FKBF is a ceramic capacitor that has a high resistance of up to 6x109Ohms. It is a two-terminal axial-type semiconductor device. This part has a very low power dissipation and a high heat-dissipation factor. It is capable of handling high operating temperatures and has a wide temperature and frequency range. It also has a very low leakage current and is highly resistant to corrosion.

A wide range of applications use the CMF55147K00FKBF, especially within the field of telecommunications. This type of capacitor is used as an impedance matching device between the transmitter and receiver in a system, to maximize the maximum possible signal level and minimize signal interference. Additionally, it is used in line protection circuits, where it provides excellent immunity against surge currents and high dV/dt, as well as providing a good connection between the signal lines and ground.

The CMF55147K00FKBF has a wide frequency and temperature range, making it also suitable for use in radio frequency (RF) applications. It is used to increase the power output of the transmitter, reduce the amplitude of the standing wave, reduce noise and interference, and improve impedance matching. It is also used as a part of low-noise power supplies. Additionally, the capacitor is ideal for use in high-precision analog circuits, since it provides excellent energy storage capabilities and low frequency noise levels.

In terms of working principle, the CMF55147K00FKBF relies on the principle of electrical capacitance. The resistor works by storing the electric charge through its dielectric material. As electric current passes through it, the dielectric absorbs a portion of the total charge, which prevents the flow of current from getting too high. In this way, the resistor acts as an active element in the electrical circuit, providing a limit to the amount of current that can pass through it.

The CMF55147K00FKBF is a versatile, reliable, and economical through-hole resistor that is widely used in many different applications. Because it has a wide frequency and temperature range, it is suitable for a variety of telecommunications, RF, and analog circuits. Additionally, its principle of electrical capacitance makes it an effective limit on current and makes it ideal for high-precision circuits. It is an excellent choice for a range of applications.

The specific data is subject to PDF, and the above content is for reference