CMF5518K400BEEB70

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are electronic components that are designed to resist the flow of electrical current. This is done by providing a specified amount of resistance to the current. The amount of resistance is measured in ohms, and is usually represented by the Greek letter omega. These resistors are used in a variety of applications, such as protecting circuits from high currents, limiting current, attenuating signals, and providing bias levels. The CMF5518K400BEEB70 is one such through-hole resistor.

The CMF5518K400BEEB70 is a 4-terminal, 5K ohm resistor. It is a through-hole component, which means that it is designed to be soldered onto a printed circuit board and requires no additional components or wiring to be installed. This particular resistor is rated for use in high-voltage applications, with a maximum continuous operating voltage of 400 volts. It is also rated for high-frequency applications, with a maximum operating frequency of up to 10 MHz. Additionally, the CMF5518K400BEEB70 is rated for up to 1 watt of power dissipation. This makes it suitable for use in power electronics applications.

The CMF5518K400BEEB70 also features a wide temperature range, rated for use in environments ranging from -55 to 125 degrees celsius. This makes it suitable for a wide variety of applications, from consumer electronics to industrial or even military applications. In terms of size, the CMF5518K400BEEB70 measures 18.9mm in diameter by 7.8mm in length, making it one of the smallest through-hole resistors available.

The CMF5518K400BEEB70 has a wide array of applications. Schottky diodes, as well as other switching devices, can be protected against electrostatic discharge (ESD) and electro-magnetic interference (EMI) with the CMF5518K400BEEB70. It can be used as a voltage divider, a circuit element for balancing currents, or as a current limiter. Additionally, this resistor can be used as part of a filter for low or high pass frequency signal filtering. In terms of power electronics applications, this resistor can be used to limit gate drive current, prevent electrical overload, and to provide thermal protection. Finally, this resistor can also be used in analog electronics circuits as a switching device or in transistors as an emitter resistor.

The working principle of the CMF5518K400BEEB70 is relatively simple. The resistor works by limiting the current flow within the circuit, as well as providing a proper amount of current to the different components within the circuit. By providing the correct amount of resistance, it ensures that the circuit operates properly and that the components within the circuit have an adequate amount of power for them to function correctly. Additionally, the CMF5518K400BEEB70 can be used to protect components from voltage and current spikes or overloading.

In conclusion, the CMF5518K400BEEB70 is a through-hole resistor designed for high-voltage, high-frequency, and power electronics applications. It is rated for up to 1 watt of dissipation and a temperature range of -55 to 125 degrees celsius, making it suitable for a wide variety of applications. It can be used to provide ESD, EMI, and current limiting protection, as well as voltage division, current balancing, biasing, and signal dulling. By properly limiting the current within a circuit, the CMF5518K400BEEB70 ensures that the circuit operates correctly and that its components receive the correct amount of power. Thus, the CMF5518K400BEEB70 is an invaluable component in many electronic designs.

The specific data is subject to PDF, and the above content is for reference