CMF5523K200BEEB70

Series:	CMF
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	23.2 kOhms
Tolerance:	±0.1%
Power (Watts):	0.5W, 1/2W
Composition:	Metal Film
Features:	Flame Retardant Coating, Moisture Resistant, Safety
Temperature Coefficient:	±25ppm/°C
Operating Temperature:	-55°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.090" Dia x 0.240" L (2.29mm x 6.10mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors are a type of resistor that is designed for use in printed circuit boards, and have terminals that are connected to both the circuit and the board. These resistors are designed to provide a predetermined amount of electrical resistance to the circuit, and are usually composed of a metal oxide conducting body and a plastic or ceramic insulator. In addition, through hole resistors can come in various lengths and shapes to suit the board’s needs.The CMF5523K200BEEB70 through hole resistor is a radial leaded resistor with a dissipation rating of 200 mW and a resistance value of 5.6 KΩ. It is designed for surface mount applications and is available in both standard and extended versions. Due to its small profile and low power dissipation, it is suitable for a variety of applications such as clock oscillators, power supplies, audio amplifiers, and radio receivers.The working principle of a through hole resistor is simple. When power is applied through the terminals, a current flows through the resistor itself, and a voltage drop across it is created. The value of the voltage drop depends on the resistance of the resistor itself, and this is known as Ohmic division. The amount of current that flows through the resistor is determined by the value of the resistance, and the current will remain constant until the voltage drop across the resistor is exceeded, at which point the current begins to rapidly increase due to the increase in voltage.The CMF5523K200BEEB70 through hole resistor is especially useful in a variety of electronic applications. It is often used in digital circuits to create protective circuits, for example. These protective circuits use a diode or a CMF5523K200BEEB70 resistor to limit the current. In power supply circuits it is also used to protect the circuits from overloads or short circuits.In audio applications this resistor is also used in amplifiers to provide negative feedback and reduce distortion. This is done by feeding a portion of the output of the amplifier back to the input, and the CMF5523K200BEEB70 resistor is used to control the amount of feedback. This allows the amplifier to produce a cleaner sound with less distortion.The CMF5523K200BEEB70 through hole resistor is also used in radio receivers to reduce noise and interference. This is achieved by creating a tuned circuit and using the resistor to reduce the levels of incoming signals. This type of resistor is able to reduce interference levels significantly and improve the overall quality of the received signal.In summary, the CMF5523K200BEEB70 through hole resistor is an invaluable component in a variety of electronic applications. It is a small, low power dissipation resistor which can be used to protect circuits, reduce distortion, and reduce interference levels. This makes it an ideal choice for a variety of applications and it is an essential part of any electronic project.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description