CMF5525R000BERE

Through Hole Resistors are extensively used in electronic equipment to provide the electrical power required to make it operate. The CMF5525R000BERE is a through hole resistor which can be found in many applications. This article is going to discuss the application field and working principle of the CMF5525R000BERE.

The CMF5525R000BERE is a power resistive element with a fixed resistance. This means that its resistance value does not change with temperature. It is normally used in applications where a large amount of power needs to be dissipated, such as motor controls and switching power supplies. In these cases, the resistor is usually connected to the load so that the excess power is discharged in a controlled manner. The CMF5525R000BERE is also suitable for use in current limiting circuits, as it can limit the current to a specified level.

The CMF5525R000BERE is a through-hole resistor, which means that the leads of the resistor go through the holes of the printed circuit board. This makes it easier to connect and solder to the board. The CMF5525R000BERE is also water resistant, making it suitable for outdoor applications. The resistor also has two resistance values, one for a continuous current and one for a peak current.

The working principle of the CMF5525R000BERE is simple. When current flows through the resistor, it will dissipate the power in the form of heat which is then dissipated into the environment. The resistor itself does not produce any heat, but it does act as a resistor to limit the current. This limits the amount of power dissipated and gives the device a longer life span.

The CMF5525R000BERE is a versatile resistor which can be used in many types of applications. It is designed for use in power supplies, motor controllers, current limiting circuits, and even in noise reduction and filter applications. The high power handling capacity and the rugged construction makes it suitable for use in harsh environments.

In summary, the CMF5525R000BERE is a through-hole resistor with two resistance values, one for continuous use and one for peak use. It is suitable for use in many applications such as power supplies, motor controllers, and current limiting circuits. The rugged construction makes it suitable for use in harsh environments and the high power handling capacity makes it suitable for use in many applications.