CMF552K4900FLBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors, or THRs, are some of the most common electrical components used in electronic devices. They are used in a vast array of different circuits and applications to limit the amount of current flow by increasing the resistance in the circuit. A THR is composed of two main parts - a non-conducting body, which serves as an insulating shell, and several leads on either side of the component. These leads are generally made of a conductive material such as copper or brass.

The CMF552K4900FLBF THR is a type of through hole resistor used in a wide variety of electronic devices. It is a leaded device, which means that the leads are soldered into place, allowing it to be used in multiple circuit configurations. The component is rated at 5 kilohms, which is very suitable for tasks such as controlling current levels in circuits.

Applications of CMF552K4900FLBF THR

The CMF552K4900FLBF THR is typically used where an accurate amount of current needs to be limited in any given circuit. Examples include power supply circuits and protection circuits. In power supply circuits, the THR is used to create a relatively constant current, regardless of the voltage input. This helps to protect other components from surges or spikes in voltage. In protection circuits, the THR is used to limit the amount of current that can flow through the circuit to a pre-determined level. This helps to protect sensitive components from damage due to excessive current.

Working Principle of CMF552K4900FLBF THR

The CMF552K4900FLBF THR is a passive component, which means that it does not require an input of energy to operate. The device works on the principle of ohms law, which states that the current flowing through a conductor is proportional to the voltage applied across its ends. Through hole resistors are designed such that they offer a fixed resistance to the flow of current, regardless of the voltage applied. This means that they can be used to limit the amount of current flowing through a particular circuit.

For instance, in a circuit with a voltage of 10 volts, a THR with a resistance of 5 kilohms will limit the current flow to 0.2 amps. This is because the equation for ohms law (V=IR) can be rearranged to find the current (I=V/R). In this case, the current would be 10 volts divided by 5 kilohms, giving a result of 0.2 amps.

Conclusion

The CMF552K4900FLBF THR is an efficient and reliable way to limit the amount of current flowing through a particular circuit. It is specially designed to offer a fixed resistance to the current, regardless of the voltage applied. This makes it a great choice for power supplies, protection circuits, and other applications that require accurate current control.

The specific data is subject to PDF, and the above content is for reference