CMF552K7400BEEB

Series:	CMF
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	2.74 kOhms
Tolerance:	±0.1%
Power (Watts):	0.5W, 1/2W
Composition:	Metal Film
Features:	Flame Retardant Coating, Moisture Resistant, Safety
Temperature Coefficient:	±25ppm/°C
Operating Temperature:	-55°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.090" Dia x 0.240" L (2.29mm x 6.10mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are usually a necessary part of any circuit, as they are in charge of limiting current flows, as well as providing a precise voltage to enable circuit components to run as designed. The CMF552K7400BEEB Through Hole Resistor is no exception and is commonly found in a wide range of applications.This resistor is specifically designed for high current loads and is able to safely dissipate large amounts of heat up to 1.4 watts at 25°C. It is ideal for industries such as automotive and entertainment when large currents must be controllable and safely managed. Its high reliability and consistent performance make it a favorite choice for technicians and electricians.The CMF552K7400BEEB Through Hole Resistor is built from a rectangular-shaped metal frame with four leads on the bottom, two for the negative and two for the positive. The negative and positive leads are connected internally by a large circle of thickened metal that works as a bridge. The resistor is then encased in a hydrogen-formulated non-flammable epoxy resin material, providing a durable yet lightweight component.The working principle of the CMF552K7400BEEB Through Hole Resistor is quite simple. Built with two separated resistive paths, the resistor works by limiting the current flowing through the resistor by creating opposition, also known as impedance or opposition to current flows. An electric field forms between the two resistive paths, causing the electrons in the flow to be dispersed, thus limiting the amount of current. The amount of resistance and resulting current is determined by the thickness of the resistive paths; the thicker they are, the higher the resistance.Since this resistor is designed for high current loads, a low resistance is needed in order to provide more current without overheating the resistor, which is why this CMF552K7400BEEB Through Hole Resistor has been built with a very thick resistive path. This allows it to achieve a maximum efficiency of 95%, meaning that the resistive path only uses a minimal amount of electrical energy and dissipates the rest as heat.In conclusion, the CMF552K7400BEEB Through Hole Resistor is an ideal choice for any circuit design that requires large amounts of current to be controllable and safely managed. Its built with two thick resistive paths, encased in a durable epoxy resin, and has a maximum efficiency of 95%, making it an efficient yet reliable component for many electrical applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description