CMF552M4100FKR6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are electronic components used to create precise electrical resistance in a circuit. They are most commonly used to reduce current in a circuit. The CMF552M4100FKR6 is a through hole resistor that can be used in a variety of applications due to its dependability and cost-effectiveness.

The CMF552M4100FKR6 is a resistor composed of two main elements - the element and the housing. The element is the part of the resistor that carries the resistance and is the main component of the resistor. It is made from a continuous film of carbon deposited on a ceramic core. The element is enclosed in a housing, which protects the element from physical damage and contamination.

The CMF552M4100FKR6 is a cost-effective resister that can be reliably used in a variety of applications. It is a non-inductive, low noise, and low power resistor that is capable of carrying up to 2 Watts of power. The resistance range of the CMF552M4100FKR6 is from 10 ohms to 10K ohms, making it suitable for a wide range of applications. The resistor is also available with a tolerance of 5%, making it even more cost-effective.

The CMF552M4100FKR6 is used in a variety of circuits, including amplifiers, filters, radio transmitters/receivers, high-voltage DC power supplies, and automotive electronics. In a DC voltage power supply, the CMF552M4100FKR6 is used to limit the current in a circuit, reducing the power dissipated in the circuit and improving the supply’s efficiency. In high-voltage DC power supplies, the resistor is used as a current control switch in the event of a power surge, preventing possible damage to the supply. In radio transmitters/receivers, the resistor is used to balance the current-voltage ratio and prevent the radio signals from getting distorted. In amplifiers and filters, the CMF552M4100FKR6 is used to reduce the level of noise and distortion in the signal.

The working principle of the CMF552M4100FKR6 through hole resistor is based on Ohm’s Law. According to this law, the current passing through a resistor is proportional to the voltage applied across it and inversely proportional to the resistance. As such, the CMF552M4100FKR6 is used to reduce the current passing through a circuit by creating a specific resistance that is not affected by temperature changes or fluctuations. As the voltage increases, the current is reduced proportionally.

In summary, the CMF552M4100FKR6 through hole resistor is a dependable and cost-effective electronic component that is used in a variety of circuits to regulate the current. It is non-inductive and low noise, and can carry up to 2 Watts of power. The resistor is used in DC power supplies, radio transmitters/receivers, amplifiers, filters, and automotive electronics. Its working principle is based on Ohm’s Law, and it is capable of creating a specific resistance that is not affected by temperature changes or fluctuations.

The specific data is subject to PDF, and the above content is for reference