CMF552R7000FKEA70

Series:	CMF
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	2.7 Ohms
Tolerance:	±1%
Power (Watts):	0.5W, 1/2W
Composition:	Metal Film
Features:	Flame Retardant Coating, Moisture Resistant, Safety
Temperature Coefficient:	±100ppm/°C
Operating Temperature:	-55°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.090" Dia x 0.240" L (2.29mm x 6.10mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CMF552R7000FKEA70 is a through hole resistor that is particularly well suited for a variety of applications. It is commonly used in applications such as power-supplies, communication systems, industrial electronics, consumer electronics and automotive electronics. It is designed to have excellent stability and reliability in these applications.Due to its through hole construction, the CMF552R7000FKEA70 is highly resistant to shock, vibration, and temperature changes, making it well suited for applications in extreme conditions. It is also very suitable for high-frequency applications as it has high self-inductance and low capacitance. Additionally, its low thermal coefficient of resistance ensures uniform temperature performance across a wide range of conditions. The CMF552R7000FKEA70 is a low-resistance, through hole resistor. Its design has a low resistance drift over temperature and rated voltage so it is considered to be more reliable and accurate in comparison to the majority of through hole resistors. It is also very tolerant to temperature changes and is capable of low resistance yields over a wide range of temperatures. The CMF552R7000FKEA70 is a through hole resistor that works on the principle of Ohm\'s law. It is commonly used in the most basic of electrical circuits and works by limiting the flow of electrical current in the circuit. Every resistor has an electrical resistance value, measured in ohms, and this is the main value that determines the amount of current that can pass through the component. When a voltage is applied to a through hole resistor, it builds up a certain amount of energy. This energy is then dissipated as heat due to the resistance of the resistor. The amount of heat dissipated will depend on the resistance value of the component. Therefore, the higher the resistance value, the more heat will be generated. This is why resistors are used to limit the flow of electricity and protect other components in the circuit.The CMF552R7000FKEA70 is a through hole resistor that is well suited for many applications. Due to its construction, it is highly resistant to shock, vibration, and temperature changes. Additionally, its low resistance drift over temperature and rated voltage make it very reliable and accurate. Finally, it works on the very basic principle of Ohm\'s law, thereby limiting the flow of electrical current and protecting other components in the circuit.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description