CMF553K2000BEEB

Series:	CMF
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	3.2 kOhms
Tolerance:	±0.1%
Power (Watts):	0.5W, 1/2W
Composition:	Metal Film
Features:	Flame Retardant Coating, Moisture Resistant, Safety
Temperature Coefficient:	±25ppm/°C
Operating Temperature:	-55°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.090" Dia x 0.240" L (2.29mm x 6.10mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors and CMF553K2000BEEB

A through hole resistor is a resistor or combination of resistors that are permanently mounted to the circuit board in a circular hole, or plated-through hole. This type of resistor is one of the most common types of resistors used in electronic circuits, owing to their robustness, stability, high power ratings, reliable performance in high temperature ranges, and ease of assembly. The CMF553K2000BEEB is a through hole resistor that is found in a variety of industrial, commercial and consumer applications. This article will discuss the application field and working principle of the CMF553K2000BEEB.The CMF553K2000BEEB is a three terminal through hole resistor. It is designed to act as a signal divider and to provide a dynamic load to the circuit. The terminals of the resistor are identified as the positive input, the negative input, and the output. The positive input provides the signal that will be divided, while the negative input provides the ground or reference point. The output of the resistor is the voltage output corresponding to the input signal.The application field for the CMF553K2000BEEB provides a wide range of uses. It can be used as a single resistor in audio applications, or as a combination of resistors in motor control applications. In industrial applications, it can be used in diagnostics, instruments and actuators. In commercial applications, it can be used in data communications, and in consumer applications, the CMF553K2000BEEB can be used in LED lighting applications.The working principle behind the CMF553K2000BEEB is relatively straightforward. When a voltage is applied to the positive input, the voltage is divided or attenuated proportional to the value of the resistor. The resulting output is then measured at the output terminal. The voltage output is determined by the value and tolerance of the resistor, as well as the input voltage.The value of the resistor is indicated by its resistance rating, which is expressed in ohms. Tolerance ratings, or the permissible variation in a given resistor’s value, are usually expressed as percentages of the resistor’s rated value. For example, the CMF553K2000BEEB has a tolerance rating of +\-5%. The power of the through hole resistor is expressed in wattage. The CMF553K2000BEEB has a power rating of 1/8 watt.The CMF553K2000BEEB is a reliable and efficient through hole resistor. It offers excellent performance in high temperature ranges and can provide reliable performance over a wide range of uses. With its capacity to provide signal division and dynamic loading, it is an invaluable component to any electric circuit board. With its wide range of applications, the CMF553K2000BEEB is an ideal choice for commercial, industrial and consumer applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description