CMF55448R00BEEB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are passive electronic components that are designed to oppose the flow of electron current or provide the electrical reference point. The most common resistor design consists of a cylindrical core covered with a ceramic or plastic sleeve with connecting leads on either side. Resistors can be used to limit current, divide voltages, control signal levels, and provide improved signal integrity in electronic circuits.

The CMF55448R00BEEB is a through hole resistor. It is a 4 watt axial-leaded wirewound resistor rated for use in high power circuits. It can handle up to 4W of continuous power, with a maximum surge rating of 10W. This resistor is optimized for use in high power applications such as electric ovens, motor drives, and HVAC systems. The resistor is composed of a thick-film Substratum, epoxy end caps, and a high-temperature-resistant Nickel-Chromium alloy wirewound element. The resistor has a resistance range of 1 ohm to 100 ohms, with a tolerance of 1% and an operating temperature range of -55C to +155C.

The CMF55448R00BEEB has a variety of features that make it suitable for many applications. First, the resistor is designed to provide superior electrical performance, with a high-temperature rating and low-temperature coefficient. Second, it is capable of dissipating heat quickly and efficiently, allowing it to handle larger wattage without risk of overheating. Third, the resistor has a low inductance and allows for low EMI/RFI radiation. Finally, the 4W rating allows it to be used in a wide variety of high power applications.

The CMF55448R00BEEB works on the principle of Ohm’s Law. The relationship between applied voltage and current through the resistor is an inverse linear relationship. That is, the higher the applied voltage, the greater the current; the lower the applied voltage, the lower the current. The device also obeys the principle of energy conservation: the power dissipated by the resistor is equal to the applied voltage multiplied by the current (P=VI). These two principles form the foundation for understanding how this device works.

The CMF55448R00BEEB is most commonly used as a limiting element in the page of high power applications. It is typically used to limit the operating current in order to protect other device elements from damage, and to provide better control over other sub-circuit elements. It can also be used to provide a precise voltage reference or calibration level in high power circuits. In addition, the CMF55448R00BEEB is also often used to reduce line noise interference or filter out high-frequency signals.

The CMF55448R00BEEB is a reliable through hole resistor. It features excellent electrical performance with high-temperature operation and excellent heat dissipation. It is designed for use in high power applications and can handle up to 4W of continuous power, with a maximum surge rating of 10W. The resistor has a resistance range of 1 ohm to 100 ohms, with a tolerance of 1% and an operating temperature range of -55C to +155C. The device works on the principle of Ohm’s Law and is most commonly used as a limiting element in the page of high power applications.

The specific data is subject to PDF, and the above content is for reference