CMF5547R500DHBF

Series:	CMF
Packaging:	Bulk
Part Status:	Active
Resistance:	47.5 Ohms
Tolerance:	±0.5%
Power (Watts):	0.5W, 1/2W
Composition:	Metal Film
Features:	Flame Retardant Coating, Moisture Resistant, Safety
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-55°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.090" Dia x 0.240" L (2.29mm x 6.10mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors: CMF5547R500DHBF

Through hole resistors are a type of component used to reduce electrical signals. They are usually made with a coil of metal or film that is insulated by an insulator, and can be used for a variety of purposes in electrical engineering, including forming logic circuits, limiting current, and providing isolating voltage. Among them, CMF5547R500DHBF resistors are a type of through-hole resistors.

Application Field

The application field of CMF5547R500DHBF resistors includes the following areas: electronic boards, medical devices, communication networks, etc. CMF5547R500DHBF resistors are particularly suitable for applications where a very high power rating is required, such as board-level applications that require high heat dissipation. They are also used extensively in automobile applications where noise reduction is very important.

Working Principle

The working principle of a CMF5547R500DHBF resistor is very simple. When a current passes through them, the resistor absorbs part of the signal and reduces the strength of the current. This is done by the resistor converting the electrical energy into heat energy. Heat generated by the resistor is then dissipated to the air around it, reducing the signal strength.The CMF5547R500DHBF resistors create an electrical circuit between two points when connected to a power source. This circuit, which can also be called an impedance, results in the resistor adjusting or shaping the electrical flow, either by blocking some of the current flow or allowing some of the current to pass through.

Advantages of CMF5547R500DHBF Resistors

Compared to other types of resistors, CMF5547R500DHBF resistors are highly reliable and durable, and can withstand temperatures up to 85℃. They also have a higher power rating and can handle higher voltage loads, making them suitable for a variety of applications where high power is necessary. In addition, they can be used in a wide range of frequencies, allowing for wider versatility of use. On top of this, CMF5547R500DHBF resistors are particularly low-cost and extremely reliable. They can be used in a variety of environments due to their small size and lightweight design, and can easily be replaced or repaired in the event of a failure.

Conclusion

In conclusion, CMF5547R500DHBF resistors are a type of through-hole resistors mainly used for reducing and shaping electrical signals in a variety of applications. They are highly reliable and durable, able to withstand extreme temperatures up to 85℃. They also have a high power rating and can handle higher voltage loads, making them suitable for a variety of applications where high power is essential. In addition, they are extremely reliable, low-cost and lightweight, making them perfect for use in a wide range of situations.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description