CMF554K5300FEEB

Series:	CMF
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	4.53 kOhms
Tolerance:	±1%
Power (Watts):	0.5W, 1/2W
Composition:	Metal Film
Features:	Flame Retardant Coating, Moisture Resistant, Safety
Temperature Coefficient:	±25ppm/°C
Operating Temperature:	-55°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.090" Dia x 0.240" L (2.29mm x 6.10mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

A CMF554K5300FEEB resistor is a type of component involved in circuit design and engineering. It is based on the through-hole resistor standing for a passive electronic element that provides electrical resistance in a circuit. CMF554K5300FEEB Resistor component is classified as part of the through-hole family of components and is commonly found in many circuits.

Through Hole Resistor

Through-hole resistors are one of the most commonly used components in electronic circuit design. They are devices that limit current flow in a circuit due to their resistance. The resistor value is stamped on the surface of the component, and is commonly referred to as the resistor\'s nominal value. Through-hole resistors are available in a variety of sizes, including both leaded and surface mount, and come in many circuit application ranges. A through-hole resistor is composed of two metal terminations extending outward from a core structure. The core material may be printed paper, a ceramic-like material, and a combination of both. The terminations are connected to the core at each side and are composed of a very thin layer of metal. This layer of metal is the contact surface of the resistor and acts as the resistor\'s impedance.

CMF554K5300FEEB Application Field

The CMF554K5300FEEB Resistor is designed for application in power management and control circuits. If used in power application, it can be used as a current-limiting resistor when operating at a voltage above its nominal value. This helps to reduce the current to the controlled circuit to prevent damage from over-current. In control application, the resistor can be used as a voltage-limiting resistor by limiting the voltage to the controlled circuit. This helps to reduce the voltage to the controlled circuit to prevent damage from over-voltage. The CMF554K5300FEEB resistor is also commonly used in dc power circuits to limit the surges of current and protect the device. In many high power dc circuits, the presence of the CMF554K5300FEEB resistor also helps to extend the life of the circuit.

Working Principle

The CMF554K5300FEEB Resistor follows the same basic working principle as other types of through-hole Resistor. This working principle is based on Ohm\'s Law, which states that the current through a material is equal to the voltage divided by the resistance of the material. This resistance is commonly referred to as the resistor\'s impedance. In the CMF554K5300FEEB Resistor, the resistor\'s impedance is printed on the surface as a nominal value. The CMF554K5300FEEB Resistor works by providing a fixed amount of resistance in a circuit, limiting the amount of current, and also limiting the voltage applied to the circuit. The current through the CMF554K5300FEEB Resistor will not exceed the value specified on the surface of the resistor, thus preventing damage to the circuit due to excessive current or voltage.

Conclusion

The CMF554K5300FEEB Resistor is a type of through-hole Resistor that is commonly used in various circuits, providing resistance and current-limiting capabilities. It is also used to control voltage in some applications, helping to protect the surrounding devices from damage caused by over-voltage. Through-hole Resistors are devices that are based on Ohm\'s Law, providing a fixed resistance value in a circuit.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description