Series:	CMF
Packaging:	Bulk
Part Status:	Active
Resistance:	6.2 MOhms
Tolerance:	±5%
Power (Watts):	0.5W, 1/2W
Composition:	Metal Film
Features:	Flame Retardant Coating, Moisture Resistant, Safety
Temperature Coefficient:	±200ppm/°C
Operating Temperature:	-55°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.090" Dia x 0.240" L (2.29mm x 6.10mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to the CMF556M2000JNBF Through Hole Resistors

Through hole resistors are electronic components used to control or limit the flow of electrical current. They are made up of two lead wires, one attached to the ground and the other attached to the power supply itself. The leads are connected to a ceramic core which contains resistive material such as metal or carbon film. The resister must be designed to ensure that a specific resistance value is achieved.

The CMF556M2000JNBF Through Hole Resistor

The CMF556M2000JNBF is a through hole resistor designed to meet the higher performance demands of industrial and military applications. This resistor is designed to have a maximum power of 2000JNBF and it is capable of providing a high degree of accuracy even at extreme temperatures. It is capable of withstanding wide temperature swings over time with minimal impact on performance.

Application Field and Working Principle

The CMF556M2000JNBF through hole resistors are designed for use in a wide variety of applications. They can provide precisely controlled resistance for radio frequency applications, low noise and high frequency signal conditioning, power supplies, motor control, and digital circuits. The precise control of current makes them highly suitable for applications where high voltage and high power are needed, such as in power transmission and motor control.The working principle of the CMF556M2000JNBF is based on the physics of electricity. The device works by using electrons as the carriers of electrical currents. It is made up of two lead wires, which when connected to the power source create a circuit. The structure of the ceramic core contains resistive material such as metal or carbon film. When electricity is passed through this material it opposes the flow of electrons, causing them to slow down and creating a resistance. This resistance is what allows for precise control of the current being used by an application.

Advantages and Disadvantages of the CMF556M2000JNBF

The CMF556M2000JNBF through hole resistor has numerous advantages which make it a preferred choice for many applications. One key advantage is its ability to provide precision control of current, even at extreme temperatures. This allows for greater safety in many applications that require high levels of current. The resistor is also designed to be able to withstand wide temperature extremes over time which is beneficial for industrial and military applications. The size of the component is also relatively small which makes it suitable for a range of applications in tight spaces. The CMF556M2000JNBF through hole resistor also has a few disadvantages which should be taken into consideration. One key disadvantage is that it has limited current capacity. This can be a major issue in applications that require higher levels of current and it is important to ensure that the current capabilities are appropriate for the application. In addition, the CMF556M2000JNBF through hole resistor can be expensive when compared to other through hole resistors. This may not be ideal for applications where cost is heavily considered.

Conclusion

The CMF556M2000JNBF through hole resistor is a versatile and high performance electronic component which can be used in a wide variety of industrial and military applications. It is designed to provide a high degree of accuracy and precision control of current even at extreme temperatures. It is able to withstand wide temperature swings over time with minimal impact on performance. The CMF556M2000JNBF through hole resistor has advantages such as its precision control of current and its small size. However, it can be expensive and has limited current capability which should be taken into consideration when selecting a resistor for an application.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description