CMF559K7600BEEA

Series:	CMF
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	9.76 kOhms
Tolerance:	±0.1%
Power (Watts):	0.5W, 1/2W
Composition:	Metal Film
Features:	Flame Retardant Coating, Moisture Resistant, Safety
Temperature Coefficient:	±25ppm/°C
Operating Temperature:	-55°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.090" Dia x 0.240" L (2.29mm x 6.10mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors are types of resistors used in electronic circuits that require the component or assembly to be securely mounted or attached on a stable surface or chassis. These resistors often provide electrical resistance against current flow, dissipate power, or regulate the flow of electricity. Through hole resistors usually consist of two metallic leads or plates that are connected directly to the resistor body, or to a mounting or assembly base. CMF559K7600BEEA is a type of through hole resistor that has a multiple-segment, branch-tab design for greater mounting stability (usually with the assistance of a mounting bracket), and to minimize the amount of space used on the surface or chassis.

CMF559K7600BEEA application field and working principle

CMF559K7600BEEA is primarily used in industrial electronics and automotive applications. These resistors are used to control the flow of electricity, as well as act as protection devices in electrical systems. CMF559K7600BEEA has a power rating of 5 watts, which makes it suitable for use in applications with high power requirements.The resistor works on the principle of Ohm’s Law. This law states that the current in a circuit is directly proportional to the voltage applied across the resistor, and inversely proportional to the resistance. Therefore, when a voltage is applied across a resistor, a current is induced and this current is inversely proportional to the resistance. The resistance offered by CMF559K7600BEEA is around 9.1k ± 10%, and thus the current through the resistor will be inversely proportional to the resistance. The voltage that can be safely applied across the resistor will depend on the power rating of the device. Since the power rating of CMF559K7600BEEA is 5 watts, it can be used in applications with a voltage up to 30VAC and 40VDC. CMF559K7600BEEA has a reverse power rating of 25milliwatts, and this means that the resistor is capable of handling reverse voltage and current. This allows it to be used in circuits that involve varying or fluctuating voltages, such as those found in automotive and industrial electronics. It is also capable of handling surge voltages, and due to its high power rating, it is capable of dissipating more heat than other types of resistors.In addition to its power rating, the resistive element used in CMF559K7600BEEA has a wide operating temperature range, ranging from -40°C to +100°C. This wide temperature range makes it suitable for use in harsh industrial or automotive environments. The resistor also has good stability, and once it is installed, its resistance will remain constant. One of the most significant advantages of CMF559K7600BEEA is its small size. It is only 7mm wide and 9.5mm long, making it ideal for applications where space is at a premium. It can also be used in applications with high-frequency signals, as the device exhibits low dielectric absorption.In short, the CMF559K7600BEEA is a through hole resistor with a multiple-segment, branch-tab design that provides increased mounting stability, power rating of 5 watts, wide operating temperature range, good stability, and low dielectric absorption. It is ideal for use in industrial and automotive applications, including those requiring varying or fluctuating voltages and high-frequency signals.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description