CMF60100K00FEBF

Series:	CMF
Packaging:	Bulk
Part Status:	Active
Resistance:	100 kOhms
Tolerance:	±1%
Power (Watts):	1W
Composition:	Metal Film
Features:	Flame Retardant Coating, Moisture Resistant, Safety
Temperature Coefficient:	±25ppm/°C
Operating Temperature:	-55°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.145" Dia x 0.344" L (3.68mm x 8.74mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Through Hole Resistors are resistors that are placed in circuit boards. They consists of a coil of wire wrapped around a ceramic core. The resistance value for each resistor is dependent upon the coil diameter, number of turns, and the material used to make the resistor. The CMF60100K00FEBF is an example of a through hole resistor.

Application Field

The CMF60100K00FEBF through hole resistor is used in a wide range of applications. In the automotive industry, it is used for automatic transmission and engine control modules, airbag systems, and air conditioning systems. In the consumer electronics industry, it is used for filter networks, power outputs, and boost circuits. In the industrial equipment sector, the CMF60100K00FEBF through hole resistor is commonly used for motor control, air handling units, and HVAC systems.

Specifications

The CMF60100K00FEBF through hole resistor is a 100K ohm resistor, with a tolerance of ±5%. It has a power rating of 0.5 watts, and an operating temperature of between -55°C and +125°C. This resistor is constructed from a ceramic core, which is wrapped in a material that is made from copper, nickel, and other metals.

Working Principle

The CMF60100K00FEBF through hole resistor works on the principle of Ohm’s Law. This law states that voltage is proportional to the current in a resistance circuit, and that the resistance value affects the amount of current flow. The value of the CMF60100K00FEBF resistor is such that it allows for a certain amount of current to flow, while still providing protection to the circuit.

Installation

Installing the CMF60100K00FEBF through hole resistor is a relatively simple process. The first step is to select the desired location on the circuit board where the resistor will be placed. Once the location is chosen, the resistor is then inserted into the circuit board, and secured in place with the soldering process. After that, the resistor must be tested to ensure that it is working properly.

Conclusion

The CMF60100K00FEBF through hole resistor is an important component in a wide range of electrical systems. It works on the principle of Ohm’s law, and provides protection to the circuit, while allowing for a regulated current flow. This resistor is easy to install, and can be used in a variety of applications, such as the automotive, consumer electronics, and industrial equipment sectors.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description