CMF60135R00FKEK

Series:	CMF
Packaging:	Bulk
Part Status:	Active
Resistance:	135 Ohms
Tolerance:	±1%
Power (Watts):	1W
Composition:	Metal Film
Features:	Flame Retardant Coating, Moisture Resistant, Safety
Temperature Coefficient:	±100ppm/°C
Operating Temperature:	-55°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.145" Dia x 0.344" L (3.68mm x 8.74mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors are components that are used to introduce electrical resistance into a circuit in order to limit current flow, reduce voltage, or provide any other desired function. They are typically constructed of a ceramic rod, a metal foil upper winding, a metal foil lower winding, and two leads (or pins). CMF60135R00FKEK resistors are one of the most common types of through hole resistors as they offer good performance at a low cost.

CMF60135R00FKEK Application Field and Working Principle

CMF60135R00FKEK resistors are used in a wide variety of applications. They can be used to limit current, reduce voltage, and to provide adjustable resistance values in a circuit. They can also be used in signal conditioning, timing circuits, and low-noise power supplies.The working principle of a CMF60135R00FKEK resistor is fairly simple. When the voltage across the resistor is increased, the current through it increases. As the current increases, it causes the resistor to warm up due to Joule heating. This heated resistance limits the amount of current that is able to pass through the resistor, thus preventing damage to the components in the circuit.The resistance of a resistor is represented through its resistance value, which is measured in ohms (Ω). A CMF60135R00FKEK resistor has a resistance value of 135Ω at 30°C. This value can be adjusted through a process known as ‘resistor trimming’. This is achieved by connecting an adjustable voltage source to the resistor and recording the results until the desired resistance level is achieved.In terms of power dissipation, CMF60135R00FKEK resistors can dissipate up to 400mW of power. This power dissipation rating is higher than most other types of resistors, making the CMF60135R00FKEK particularly suitable for high-power applications.The advantage of using a through hole resistor instead of a surface mount resistor is its greater physical stability. This is because when installed using through hole mounting, they are mounted directly to the circuit board using a securing screw. This makes them more resistant to vibration and shock, making them suitable for use in applications where vibration and shock may be present.With all the advantages that through hole resistors offer, it’s no wonder that the CMF60135R00FKEK is one of the most popular through hole resistors on the market. Its combination of affordability, performance, and durability make it suitable for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description