CMF6024K900BER6

Series:	CMF
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	24.9 kOhms
Tolerance:	±0.1%
Power (Watts):	1W
Composition:	Metal Film
Features:	Flame Retardant Coating, Moisture Resistant, Safety
Temperature Coefficient:	±25ppm/°C
Operating Temperature:	-55°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.145" Dia x 0.344" L (3.68mm x 8.74mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Through Hole Resistors are resistors which are available both as through-hole component types and surface Mount Devices (SMDs). They provide instant resistance change when currents or vibrations interfere with the power supply. This type of resistor has a very quick response time and is commonly used for protection, signaling, and other applications where rapid changes in resistance are required. The CMF6024K900BER6 is one such through-hole component type resistor, and this article will discuss its application field and working principle.

Application Field

The CMF6024K900BER6 Through Hole Resistor’s application field includes a variety of electronics projects, both small-scale and large-scale. Its resistance range of 0-22R makes it suitable for many different types of circuits, ranging from audio amplifiers to LED drivers. Moreover, its wide resistance range and good accuracy (±1%) make it ideal for designing various kinds of multi-layer Printed Circuit Boards (PCBs). Also, they can be used for power supply voltage stabilization and surge protection in aircraft and satellites. Its long-term stability and ability to withstand high-frequency, high-temperature, and overload conditions make it suitable for many industrial applications.

Working Principle

The CMF6024K900BER6 Through Hole Resistor works on the principle of Ohm’s law. Ohm’s law states that the current flowing through a conductor is directly proportional to the voltage applied across the conductor. This means that the amount of current flowing through a resistor can be calculated using the formula I (Current) = V (Voltage) / R (Resistor). Additionally, the resistance value of a resistor is determined by its material, size and shape. The CMF6024K900BER6 Through Hole Resistor is made of a manganin alloy which provides a low resistance and high temperature coefficients. The resistance value can be adjusted by increasing or decreasing the size, shape, and composition of the metal.

Conclusion

In conclusion, the CMF6024K900BER6 Through Hole Resistor is a very versatile component which can be used in a wide range of applications. Its relatively high accuracy and wide resistance range make it suitable for designing various kinds of multi-layer Printed Circuit Boards. Additionally, its resistance properties make it suitable for industrial applications, power supply voltage stabilization, and surge protection. Finally, its working principle of Ohm’s law is quite simple and easy to understand.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description