CMF6045K000BEBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are most typical and widely used resistors in the field of electrical and electronic engineering. CMF6045K000BEBF is one of the commonly used Through Hole Resistors with its application field and working principle.

Application Field

CMF6045K000BEBF is a Through Hole Resistors with a maximum power rating of 12 watts for resistor applications such as high voltage and temperature stability. It is suitable for use in circuits with a wide range of voltages and frequencies. It has a maximum operating temperature of 250°C and a high stability of 0.1%. This resistor is suitable for applications such as power supplies, filters, oscillators and waveform generators. Its selection of suitable through hole resistor for a range of application requirements makes it an ideal choice for engineers.

As a through hole resistor, it is normally used in printed circuit boards. The through-hole design reduces the possibility of accidental unplugging and can reduce the costs of installation and maintenance. The resistor’s metal oxide film finish is highly resistant to shock, vibration and most chemicals, extending its life. CMF6045K000BEBF can also be used in high frequency signals, drive signals, microwave instrumentation, control, stability, and gain standards.

Working Principle

The working principle of CMF6045K000BEBF is based on Ohm\'s law — as the voltage applied across it increases, the current increases proportionately. The resistor works by limiting the amount of current that can flow through it, which serves to protect other components in the circuit from damage due to overvoltage or excessive current. Current limiting resistors generally have a stable resistance value over a large temperature range and are used in many applications where accurate current control is required.

As a through hole resistor, the CMF6045K000BEBF has two wire leads that protrude from each side. The leads are inserted into holes on the printed circuit board. The resistor is then soldered into place, ensuring electrical continuity between the two components. The body of the resistor is made of metal alloy to withstand varying temperatures, and is coated with a protective layer of material to ensure that it is protected from moisture, electrical shock, and other environmental factors.

The CMF6045K000BEBF is a through hole resistor that is suitable for a broad range of applications. Its metal oxide film finish makes it highly resistant to shock, vibration and corrosion, and its ability to withstand high temperatures make it suitable for use in high power circuits. Its selection of suitable through hole resistors for a range of application requirements makes it an ideal choice for engineers.

The specific data is subject to PDF, and the above content is for reference