CMF608K1920BEEB

Series:	CMF
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	8.192 kOhms
Tolerance:	±0.1%
Power (Watts):	1W
Composition:	Metal Film
Features:	Flame Retardant Coating, Moisture Resistant, Safety
Temperature Coefficient:	±25ppm/°C
Operating Temperature:	-55°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.145" Dia x 0.344" L (3.68mm x 8.74mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors: CMF608K1920BEEB application Field and Working Principle

Through-hole resistors are passive electronic components with simple metal-film wires passing through an insulating material. These resistors are usually made of metal oxide and are popular in many applications, from automotive to consumer electronics. The CMF608K1920BEEB is one of the most popular through-hole resistors, and is primarily used in automotive applications.The CMF608K1920BEEB is a surface mounted, through-hole resistor that is used in many vehicle electrical systems. Resistor elements are made of metal oxide, and a variety of termination styles, such as gull-wing or tab-mount, are available. Due to its small size and relative affordability, the CMF608K1920BEEB is widely applicable in the automotive industry. Its metal oxide construction and through-hole design also allow for a uniform current distribution and excellent dissipation of heat. In terms of design, the CMF608K1920BEEB is made of several components. The resistor consists of an insulating material called a cermet, usually made of metal oxide and ceramic, and two tantalum terminations, also known as pins. The pins provide two points of contact for the resistor to be mounted into the motherboard, and are typically soldered onto the board. Most resistors are also covered with a protective plastic coating, which helps protect the resistor from external electrical interference or corrosion. In terms of function, the resistor serves to reduce or limit the amount of electrical current that passes through it. Depending on the application, the resistance value will determine the amount of current that is allowed to pass through the resistor. As mentioned earlier, the CMF608K1920BEEB is primarily used in automotive applications. Its small size and cost effectiveness make it suitable for use in a variety of vehicle electrical systems, such as engine control modules, headlight control units, door locks, and airbag systems. In addition, its through-hole design is suitable for use in high-voltage systems, such as those found in the automotive industry. In conclusion, the CMF608K1920BEEB is a popular through-hole resistor that is mainly used in automotive applications. Its small size and relative affordability make it an ideal choice for many vehicle electrical systems. Its metal oxide construction and through-hole design also allow for a uniform current distribution and excellent dissipation of heat. These features, combined with its resistance value, make it an ideal choice for many applications within the automotive industry.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description