CMF651M0000FEBF

Series:	CMF
Packaging:	Bulk
Part Status:	Active
Resistance:	1 MOhms
Tolerance:	±1%
Power (Watts):	1.5W
Composition:	Metal Film
Features:	Flame Retardant Coating, Moisture Resistant, Safety
Temperature Coefficient:	±25ppm/°C
Operating Temperature:	-55°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.180" Dia x 0.562" L (4.57mm x 14.27mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

CMF651M0000FEBF application and working principle of through hole resistors can be varied and complex depending on the specific component and application requirements. However, the fundamental principles in resistance and current flow are the same for all through-hole resistors.Resistors are components that generates heat when electrical current flows through them and are used to limit or regulate the flow of current in a circuit. They can be made of metal, carbon, or a ceramic mixed with metal oxides.Every resistor is created with two leads/terminals- lead A and lead B. Low-ohm resistors, like CMF651M0000FEBF, also known as through-hole resistors, use metal leads that are designed to be inserted directly into a printed circuit board (PCB), making them easier to solder.Also, such resistors have to be applied with both thermal and electrical insulation, and that is when the golden gold or white epoxy coating on the surface of the component — also known as “body resin” — comes into play.CMF651M0000FEBF is a low-ohm resistor with a 0.001 ohm resistance value. The working principle of through-hole resistors like this is to limit and regulate the flow of current in the circuit. In other words, it diverts the electric current away from sensitive components or prevents short circuit in the circuit.One can find other applications for the CMF651M0000FEBF resistor, like in high power switching applications, noise filtering, or even to create a voltage divider. In a voltage divider, two resistors of different resistance values are connected together in series and the voltage drop is divided between the two resistors according to the ratio of their resistance.In conclusion, through-hole resistors like CMF651M0000FEBF application and working principle are used to limit and regulate current in electrical circuits, as well as for high power switching applications and noise filtering. They are also used to create voltage dividers, where electricity is divided between two resistors according to their resistance ratio.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description