CMF654R9900FKR6

Through hole resistors are one of the most common types of resistors found in electronics today. The CMF654R9900FKR6 is a resistor specifically designed for this type of application. With its long lasting durability and excellent performance, it is an excellent choice for any electronics project.

A through hole resistor is a type of resistor that has two or more terminals that are connected to a fixed resistor element. The resistor element is then mounted inside a ceramic or metal housing and the terminals that are connected to it are accessible through holes in the housing. These holes are also used to provide electrical connections between the resistor and circuit board, as well as providing mechanical stability.

The CMF654R9900FKR6 is a through hole resistor that has a very high resistance rating. It is made with three layers of metal oxide and each layer has its own resistance rating. This allows for a very high resistance rating of up to 9.9 kiloohms. This resistor has a low temperature coefficient and is designed to withstand up to 125°C. It also has a very low TC of only 0.5ppm/°C, making it suitable for use in high temperature applications.

When using a through hole resistor, one of the main considerations for the application is the type of resistor. The type of resistor needed will depend on the type of circuit being used and the resistance needed for the application. The CMF654R9900FKR6 is an excellent choice for high resistance applications, where it is needed to reduce the voltage ripple or current flow in a circuit. It is also suitable for low resistance applications, where it can be used to control the current flow or voltage level. Additionally, this resistor is ideal for use as a protection component in circuits that are subject to high temperatures and electrical surges.

The working principle of the CMF654R9900FKR6 is quite simple. When voltage is applied to the leads of the resistor, the resistor element will begin to resist the flow of electricity. This resistance produces a voltage drop across the resistor element, reducing the overall voltage in the circuit. This voltage drop is measured in ohms and is referred to as the resistance rating. Depending on the type of resistor being used, this resistance rating can range from 1 ohm to several hundred kiloohms.

The CMF654R9900FKR6 is an excellent choice for through hole resistor applications and can be used in a wide range of applications. Its superior performance, particularly in high temperature applications, make it well suited for use in industrial, automotive, and military applications. Additionally, its high resistance rating makes it ideal for use in high voltage and power supply applications, where it can be used to regulate the voltage level in the circuit.